0
What is the difference by v-75 PVC sheathed insulation and v-90 v-75 PVC sheathed insulation?
Wiki User
∙ 11y ago
V90 is a higher temperature rating than V75. V90 cables can conduct more current without over heating/melting its insulation.
V110 is a higher rating than V90.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What happened to finalstory v75?
It died. :(
You dont know your password to dowload Maplestory v75 can any one help you?
You do not need a password to download Maplestory.
What microphone do contestants use on American Idol?
The onstage microphones are custom made by Blue Mikes designed by Dr Dre for season 10.
How do you play Maple Flash V75 Using Micromedia Player 9 It says i need to abort some scripts and then i said yes and the game stays normal and i cannot play it?
click no let scripts run
What version of Maplestory should I play?
..The current latest. PRIVATE SERVERS: v75. There are a couple v83 or so, though. I would suggest Maplepimp(don't know if its down). goto http://www.maplepimp.com/ 1000xexp,800xmeso,5xdrop,and you can manually summon silver slimes(level 40 gives 2bil exp)
What is the best site you can download v75 maple story from?
Your maplestory should get a patch up download when you hit the play button. That patch up will upgrade your version to the latest version that is released. Currently in March 2010, mapleglobal is at v83 so... if you missed version 75-83 i suggest you to uninstall and redownload your maple because missing too much patch ups will cause your maple to stop working. If you have version 80 for an example, you cant go backwards in versions. Just not possible.
What size wire do you use to install a 40Amp breaker for a 240V receptacle for use with a 240V range?
For USA, Canada and other countries running a 60 Hz supply service.If you had to ask this question here you need to learn more about your local wiring code re all the items you must use for a new household AC power range circuit.Serious home fires can result from incorrectly installed new circuits.So that the new installation is safe and legal - and complies with the terms of your home insurance policy - you must use the correct type and size of cable, the correct type of circuit breaker and the correct type of wall outlet.From the local wiring code, a licensed electrician will know which size of wire to use because the answer depends both on the current to be carried (amps) and on the length of the run from the breakers on the main supply panel to the place where the outlet for the kitchen range is to be fixed.Another answer#8 awg Copper or #6 awg Aluminum but first of all you should check in the NEC wire sizing tables for the cable size given for your length of run. If installing in conduit install no more than 6 current carrying conductors, i.e. black, red, or white, or you must increase the size of your wire. If installing this circuit using a jacketed cable like NM-B then you should use a 4 conductor cable, not 3 conductor as in the old days.As always, if you are in doubt about what to do, the best advice anyone should give you is to call a licensed electrician to advise what work is needed.Before you do any work yourself,on electrical circuits, equipment or appliances,always use a test meter to ensure the circuit is, in fact, de-energized.IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS.
How do you fix leak between fuel line and injector on 1989 jeep Laredo 4 liter?
DO NOT USE VASELINE. Many o-rings are made of petroleum based compounds. Vaseline, being pure petroleum jelly may well erode/damage/eat the o-ring. You may have to replace within several weeks or a few months. ONLY USE SILICONE OR SILICONE BASED LUBRICANTS which are readily available at auto supply stores or dive stores. [further discussion of o-rings below] just pull the injector off and replace the o-rings (cheepo tiny little rubber o- ring that seals the injector into the fuel ine. Make sure you put vasoline on the new o-ring and you replace the injector back carefully. I have replaced this on 4 diffrent injectors and it solves the problem every time - also - get yourself a kit of them because the same o-ring fits into the fuel line going into the fuel bar also... [MORE ON COMPOUNDS USED TO MANUFACTURE O-RINGS] N70 BUNA NITRILE COMPOUND General Properties: Polydraulic Systems Nitrile (BUNA-N) is a copolymer of butadiene and acrylonitrile. These two compounds have a relatively high acrylo content, making them exceptionally resistant to petroleum base oils and hydrocarbon fuels over a temperature range from 40F to +250F. More than 50% of all o-rings sold are Nitrile O-Rings. They are commonly used in hydraulic and pneumatic applications, as well as cylinders, pumps and valves. V75 VITON. COMPOUND General Properties: VITON is depot's trade name for fluorocarbon elastomers. These compounds offer the best resistance to a combination of chemicals, weather, and compression set over a temperature range of 20F to +400F. Intermittent exposure up to +600F can be tolerated for brief periods. Many industrial products are making a switch to the extended capabilities of VITON O-Rings. The development of the VITON compound is one of the most significant elastomer developments in 50 years. S-70 SILICONE COMPOUND General Properties: Polydraulic Systems silicone compounds offer a broad temperature range (-80F to +400F) as well as excellent dry heat resistance. Our silicones are inert and we guarantee complete compliance with ASTM, Military, and FDA specifications when certification is requested at the time of the order. Silicones are often used by food, medical, electrical, and filter manufacturers. Silicones should not be used in dynamic seals because of relatively poor tensile, tear, and abrasion resistance. E300 EPDM COMPOUND General Properties: Polydraulic Systems EPDM's have a temperature use range of -650F to +3000F for sealing most media. Steam service, however, is rated at up to +4000F. EPDM Compounds are frequently used with foods, water, and steam service applications. EPDM also offers the best resistance to ozone and weathering. They are not used with petroleum oils or fuels because significant swelling would result.
