The step-up transformer steps up the input voltage to a higher level so that it can be transmitted over a transmission line using smaller conductors. By the power law, power equals volts times amps, so you can achieve the same power with higher voltage and lower current, but the wire size is based only on current.
On the other end, step-down transformers reduce the high voltage back to usable levels.
When the output voltage is higher than the input voltage that is considered a step up transformer. When the output is less than the input you have a step down transformer. Input is also called primary and output secondary.
a transformer changes voltage and current by inducing a changing magnetic field in one coil. this changing field then induces an alternating current in a nearby coil with a different number of turns.
AnswerA 'step-up' transformer is one in which the voltage (not current!) induced into the secondary winding is higher than the voltage applied to the primary winding. In other words, it's used to provide a voltage that is higher than the available supply voltage.
A stepup transformer increases the voltage to decrease loss of energy due to long distance transmission..
the main function of transformer is to change the magnitude of Voltage. difference between step up and step down is step up will change the input voltage into a larger magnitude of output while step down is vice versa
step- up transformer
increase the amount of voltage
For a step-down transformer, its secondary winding will be the LV winding. For a step-up transformer, its primary winding will be its LV winding.
Injecting power into the higher voltage winding of a transformer will make it act as a step down transformer; injecting power into the lower voltage winding will make it act as a step up transformer. A transformer can be used both ways.
Transformer function is either to step-up or down the voltage. There is nothing like an ordinary transformer.
A transformer is used to step up or step down a Voltage supply.
the main function of transformer is to change the magnitude of Voltage. difference between step up and step down is step up will change the input voltage into a larger magnitude of output while step down is vice versa
step up transformer output gives the high voltage which is useful for transmiission of electricity
step up transformer output gives the high voltage which is useful for transmiission of electricity
A step up transformer is used to step up an AC voltage
A transformer that increases voltage is a step-up transformer.
step- up transformer
The function of a step up transformer is to step up the voltage given to it. For eg 11/32KV transformer steps up 11 KV to 32 KV. The function of step down transformer is to step down voltage For eg 420/230 V it steps down 420V to 230 V It does step up or down According to step up or step down ratio called transformation ratio k which equals to K=Ns/Np =Vs/Vp =Ip/Is ie ratios Ns:Np=Vs:Vp=Ip:Is=k Vs=secondary voltage Vp=primary voltage Ns=secondary number of turns Np=primary number of turns Is=secondary current Ip=primary current
A step-up transformer is a transformer that increases voltage that is transferred through power lines.
They do not step up energy. They can step up voltage.
A transformer that increases voltage is a step-up transformer.