Gang capacitors are a series of capacitors that are mounted to a common location. When they are mounted in series, they can be controlled by a single switch instead of multiple ones.
Older ballasts with an iron core are basically an autotransformer. They transform voltage to a higher voltage with a single winding. Electronic transformers increase voltage with capacitors and diodes.
Commutation Capacitors are usually switched in parallel to the thyristors.
Usually commutating Capacitors are used in bistable multivibrators. To change the states of two transistors in bistable MVs, a trigger is applied. But due to the capacitance at base of transistor it takes sometime (delay) to change the state. To overcome this problem Commutating capacitors are used. So these are also known as Speed up capacitors or Transpose Capacitors as they speed up the operation.
Capacitors are rated in Microfarads
The principles of operation of the automatic voltage regulator is that of the excitation system. The working principle is to regulate the flow of reinforcement on the exciter.
Older ballasts with an iron core are basically an autotransformer. They transform voltage to a higher voltage with a single winding. Electronic transformers increase voltage with capacitors and diodes.
principle refers to the basic objective of something. Operation refers to how it operates.
Gang gang
Commutation Capacitors are usually switched in parallel to the thyristors.
Gang capacitors are commonly used in radio tuners/receivers. Radio tuners/receivers have formation of LC(inductance and capacitor). Here this circuit has one fixed inductance and capacitor parallel with gang capacitor. Normally gang capacitor used in superhetrodyne receiver.
Bernoulli's principle. The above answer is wrong. Its Pascal's Principle :)
Give a brief idea of principle of hysteresis motor,application.
Dialyisis
the metal thing??
Usually commutating Capacitors are used in bistable multivibrators. To change the states of two transistors in bistable MVs, a trigger is applied. But due to the capacitance at base of transistor it takes sometime (delay) to change the state. To overcome this problem Commutating capacitors are used. So these are also known as Speed up capacitors or Transpose Capacitors as they speed up the operation.
Usually commutating Capacitors are used in bistable multivibrators. To change the states of two transistors in bistable MVs, a trigger is applied. But due to the capacitance at base of transistor it takes sometime (delay) to change the state. To overcome this problem Commutating capacitors are used. So these are also known as Speed up capacitors or Transpose Capacitors as they speed up the operation.
The basic principle of operation for most equipment circuits revolves around the flow of electrical current through various components to perform specific tasks. Each module or component, such as resistors, capacitors, and transistors, plays a distinct role; resistors limit current, capacitors store energy, and transistors act as switches or amplifiers. Together, these components manage voltage, control signals, and process information to achieve the desired functionality, whether in power distribution, signal processing, or control systems. Ultimately, the integration of these modules allows the equipment to operate efficiently and effectively for its intended application.