Its depends on location and type of towers. Supposed the transmission line is erected at hill area and second line is erected in desert area and third one in forest area. Then the allowable value of weight span and wind span ratio in transmission line will different. Also this ratio will depends on types of tower . Like the value is different in 132KV, 220KV , 400KV and 765KV.
Transmission line can be on H frame up to 66 kv, it can be on structral hollow MS/ wooden high Mast similar one used for illuniating open area , or letice strcutral tower , this depends on level of volatge and type of conductor, land profile and tower spoting.
We are professional steel tower manufacturer -- Ningbo Huyong Electric Power Material Co., Ltd. Our company specialized on manufacturing and exporting transmission line towers and communication tower for 18 years. Hope to find general contractor, and cooperate with you. My Email: lingli0628@live.cn
Lattice steel tower consist of:- 1- Main members. 2- Bracing members. 3- Redundant members. Steel Bracing is the connection between main members of lattice steel tower.
It is necessary because lightning can destroy whole phase conductors. Lightning has energy of 1MHp. So much high energy if falls on transmission line will not even destroy it but all of the distribution systems too. The reason that lightning falls on tower is that it always chosses the shortest path.
The current angle of the tower is about 3.97 degrees.
Kiel Transmission Tower was created in 1975.
Its depends on location and type of towers. Supposed the transmission line is erected at hill area and second line is erected in desert area and third one in forest area. Then the allowable value of weight span and wind span ratio in transmission line will different. Also this ratio will depends on types of tower . Like the value is different in 132KV, 220KV , 400KV and 765KV.
PLS CADD for towen design & tower spotting
ask the tower to repeat the transmission by saying say again
7m
11 degrees to the southeast.
A girl 1.2 m in height is 25 m away from a tower 18 m high. What value is the angle of elevation of the top of the tower from her eyes?
. The angle of depression of the top and bottom of a tower as seen from the top of a 100m high cliff are 300 and 600 respectively. Find the height of the tower.?
Depends which angle you look from.
Given the following information provided, it is 19.5 meters away from the tower.
nope. a right triangle means that one angle is 90 degrees. the Eiffel tower has two angles that are less than 90. and one angle that is very small and thin