In China, the wire color code for AC wiring typically follows the standard where brown is used for the live (phase) wire, blue for the neutral wire, and green/yellow striped for the earth (ground) wire. This color coding helps ensure safety and proper connections in electrical installations. Always verify with local regulations, as practices can vary.
These colour wires are used in European and UK wiring. The blue wire is used to the identify the neutral conductor and the brown wire is used to identify the "hot" conductor.In Canada and the US. The white wire is used to the identify the neutral conductor and the any colour but green is used to identify the "hot" conductor.
The colour red designates that the wire is used as a live wire. The neutral wire is identified as white in colour.
In the U.S., the white wire is common. This connects to the wide slot of an outlet. You should verify this, either with an outlet tester or voltmeter, since you don't know who may have been working on the wiring before. If you don't have experience working with house wiring, I would recommend getting a do-it-yourself book to be safe, and make sure your work meets code.
In household wiring it is the "hot" wire that carries current to the load.
GREEN
There is not a colour code system as such on Peugeot's Near to the end of the wire is a number this is the code.
all Audi model wiring colour code.which battery wire, and ignition wire. or stater wire.
Red or Blue
Mainly copper is used for household wiring but it may vary.
blue and black
Wiring a T101 timer is easy. All you have to do is color code the wiring into the input sections.
The red wire is the positive wire. The black wire is the ground wire. The green and yellow wires are the speaker wires. The white wire is the auxiliary wire.
Each country has its own electrical wiring code so it depends where the question comes from.
The red wire is the positive wire. The black wire is the ground wire. The green wire is speaker wire. The white wire is the auxiliary wire.
In my house it is green $#@! when I found it I also received a small shock.
In most installations in a two wire circuit the colour will be black. In a three wire circuit there will be two ungrounded conductors using a colour code of black and red.
The red wire is the positive wire. The yellow and green wires are the speaker wires. The brown or black wire is the ground wire. The white wire is and auxiliary wire.