0
What protection must be provided when installing a cable in a notched stud or joist?
Wiki User
∙ 11y ago
A metal plate, 1.59mm thick and measuring about 76mm x 41mm. Used to protect cable laid in notch in stud.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
When installing surface mounted cable the best method of ensuring that it is kept straight is by?
When installing surface mounted cable the best method of ensuring that it is kept straight is by using more fasteners that is required by the electrical code. Another way is to install it into a conduit chase. The conduit can be fastened to the building using a level to keep it straight. The cable can then be pulled into the conduit.
What is the purpose of ground wires in overhead transmission lines?
connection of the ground of all the transmission lines and used as a communication cable between protection devices
What is earthing screen in electrical engineering?
It is an additional layer of metallic shielding, braided around the cable insulation through out the cable length. It is provided to avoid any electro magnetic interference (EMI) if any. This screen is connected to ground at one end of the cable. Such cables are usually signal or control cables.
What protection is required when cables pass through holes in metal work?
A protective bushing has to be installed so that the outer sheath of the cable is not damaged during the installation.
Does 6 gauge wire need to be in a conduit if run in a finished garage along the wall and ceiling?
If you are talking about #6 building wire, it needs to have mechanical protection. This means that it has to be run in conduit. If you are talking about #6 cable set like Romex, then it only has to have mechanically protection below a five foot elevation from the garage's finished floor. If the wall that the cable set is running in is going to be finished with drywall or plywood then that is considered protected.
What components should be deactivated when installing a cable modem?
Which components should be deactivated when installing a cable modem
How does cable sizing calculation gets affected by earth leakage protection?
Ground / earth protection will not impact cable sizing.
Why use armor for cable?
For protection.
What cable to you connect first when installing a car battery?
red or positive
How do you install the gear shift cable on a 1991 camaro?
easy by installing it
What are some great methods of cable protection?
When it comes to cable protection, there are many ways to protect the cables from damage. A if a person wants basic coverage, they could use tape on the cable, or if they want some better protection, they could use a thing like Grip Guard Cable Protector.
What meant by armored cable and why it is used?
For protection of the wires.
What cable do you connect when installing a battery?
connect positive first then negative that is the safe way to do it
What is the difference between internet provided by ADSL and internet provided by cable?
The difference between internet service provided by ADSL and internet provided by cable is in the method of delivery. ADSL is high speed internet which is delivered through one's home phone. Cable is broadband internet delivered, as is stated, through cables.
Which method of installing cables ensures the highest current rating for each cable size?
Cables spaced apart on cable ladder, shaded from sun
How do you replace a mower battery cable?
remove the cable from the battery, follow it to the other end, ground or starter, reverse the same for installing a new one,
Which cable offer the best protection against EMI?
UTP
