0
What else can I help you with?
Which type of DVI connector can be used to send either analog or digital signals?
DVI-I
What is the difference between cathode ray oscilloscope and digital storage oscilloscope?
CRO means cathode ray oscilloscope. The Cathode Ray tube is the display mechanism only. A CRO can be a digital or analog scope, with or without digital storage. A digital storage scope can use a CRO as the display mechanism, or it can use a LCD screen, or any other method. There was a type of Cathode Ray tube that used analog means to store the information on the screen, The storage takes place on the screen itself. They were pretty rare, and not seen at all today, as they didn't work very well. Perhaps that is what you are referring to?
What are the advantages of digital system over an analog system?
In general there is no direct advantage or disadvantage for either of the two technologies. There are various criterias that may result in an advantage for one of both in each specific design. All items below have to be considered during the design of (a part of) a device: * Is the electronic interfacing to analog or digital sensors / actuators / communication networks * What is the power budget * Is there a need for reconfiguring the design * What are the costs of the components * What are the skills of the available developers? Are they hardware or software minded? * What are the data throughput requirements? Those questions do influence the design. If this question refers to an already made design, the following items are important: * Digital systems which are processing analog data need to convert those signals. The conversion is the critical part. * Does the converter takes enough samples with a high enough resolution to be able to re-generate the original signal? * does the conversion use a lossy or loss-less compression technique? * Has the signal to be distributed over long distances, or to a lot of different places? Digital system easily integrate error detection and correction, where analog systems have more difficulties to do this. * Is a high quality required? You can see that it is strongly related to the target application, thus you have to make your own decision which is best in your situation. SPEED
Why is digital communication known as digital communication?
Digital communication is called that because it uses digital signals—usually in the form of binary code (0s and 1s)—to send, receive, and process information. Unlike analog communication, which uses continuous signals, digital communication breaks data into discrete units and transmits it electronically. This type of communication happens through digital marketing agency in delhil devices like computers, smartphones, and the internet. Examples include emails, text messages, social media, video calls, and online advertising. It’s called digital because the entire process—transmission, reception, and processing—is handled using digital technology, which allows for faster, more reliable, and more efficient communication.
Why is a pulsing voltage easiest to read on an analog meter?
This is because digital meters do not continuously update the display. My meter for instance only shows a new number twice a second. If the voltage peaks between updates, you will never see it. Analog meters continuously follow the voltage, and the eye can follow the pointer as it peaks. Many electricians and technicans still hang on to their beloved Simpson 260 analog meter for this very reason. Many digital meters now have a little bargraph below the main display, set to act like an analog meter, to make this type of visual measurement possible. It should be noted that even the analog meter does not respond perfectly to voltages that change quickly, because the physical mass of the meter movement cannot accelerate insantaneously. So, if you see the needle "pulse", you know there was one, but you cannot rely on the needle to show the true peak. Such measurements are used to see the trend or get a rough idea of what is happening in the circuit. If you need to find the exact value, use an oscilloscope!
How do you check analog to digital converter is working or not?
connect a any one type of indicating device at output like LED
Is a computer an analog device?
The majority of modern computing devices are digital. That means they work by using many on and off type electrical signals. Analog computers work by using vary ranges of constantly-changing signals in real-time without converting them to digital sequences first.
What is analog device?
Analog devices are machines and components that react or work in a linear manner, often with an ability to make a continuous change. For example, a volume knob on a radio could be an analog device because it controls audio power output over a continuous range. Many amplifiers, power supplies, and radios use analog devices for generating or processing analog signals. Digital devices are machines and components that are always found in one specific state or another, rather than in some range between two points. Many analog and digital systems are designed to simulate the best features found in the other type of system, e.g., analog controls on a digital CD player, or digital controls on an analog radio.
What is the transfer of digital or analog data using digital or analog signals?
The transfer of digital or analog data using digital or analog signals refers to the process of transmitting information from one device to another, either through digital signals or analog signals. Digital signals are electronic signals that represent binary data, while analog signals are continuous signals that represent continuous data. The method of transfer depends on the type of data being transmitted and the technology being used for the transfer. For example, digital data can be transferred using digital signals through a computer network, while analog data can be transferred using analog signals through a telephone line. Regardless of the method used, the goal of the transfer is to accurately transmit the information from one location to another.
What are the advantages of digital stereo plotter over the analog type?
Digital stereo plotter is more accurate than the analog one in producing maps.
Can you convert a TV to digital TV?
It is not possible to convert an analog television to a digital television. However, by using a digital set top receiver, it is possible to receive digital signals and deliver them as an analog signal to an analog television. Digital receivers are not expensive, starting at around $25 in US and £20 in the UK. They will allow all terrestrial channels to be received in the same way that a digital television will. Cable and satellite receivers can also receive digital signals and will provide an analog output that can be used with older televisions. With these options, there is no need to replace analog televisions right away. Remember that analog only televisions will not be HD so don't expect a sudden increase in picture quality when the digital receivers are used.
How do you connect a laptop with HDMI to a tv with only rca?
I'm sorry, but without special hardware - you don't. HDMI is a digital meta-data-enabled connector, while RCA is analog signal type. You would have to have a device that would take the digital information, decode it and send it off as analog to the TV.
What is A type of communications device that connects a communications channel to a sending or receiving device is a?
A type of communications device that connects a communications channel to a sending or receiving device is a modem. Modems modulate and demodulate signals for transmission over various types of media, such as telephone lines or cable systems. They enable digital devices to communicate with each other by converting digital data into analog signals and vice versa.
How do you get digital reception by antenna with a digital TV?
I get a perfect picture on TV using an antenna. Can not get digital signal to come thru when using either a converter box or a new digital TV. I have following all the instructions carefully and can get no signal for digital. The antenna is new and hooked up correctly. Get perfect analog pictures. Why can't I get a digital picture? DTV signals are for the most part weaker than the old analog signals. Your new antenna needs to be a high gain VHF/UHF type with a built in or add on amplifier at the antenna. Don't forget to use new coax cable between the antenna amp and the TV set. Be sure the antenna is pointed directly at the transmitters, many have been moved. Sometime a rotor is a great help if the transmitters are in different direction's. If you using splitters, etc, they might need to be replaced with ones that will pass UHF (900 MHz) signals.
Will a rooftop antenna work with a digital converter box?
Short answer: Yes!Longer answer: Digital TV and Analog TV share much in common; they are both radio signals, and in the same bands -- in fact the channel number assignments for the physical channels are identical. Your rooftop antenna picks up the radio signal no matter what is encoded on it. It is up to the receiver (your converter box, f'r'instance) to make sense of what comes from that antenna. Select a VHF/UHF type.
Which is the slowest analog to digital converter?
Parallel-comparator (i.e. flash type
What can one do with a DTV antenna?
A DTV antenna is used to capture digital television signals. By law, all television signals in the United States must be digital, and this type of antenna is used by customers who do not subscribe to satellite or cable services.
