Copper is used as a substrate of the contact meterial; on the grounds of cost; but the actual contacts themselves may be made of silver. Silver does not corrode a badly as copper, and a well designed switch will have a 'wiping' action in its operation, for this prolongs the life of the contacts.
In corrosive atmospheres, such as Rotorua, New Zealand, there is a quantity of H2S in the atmosphere, and platinum contacts are often used.
Yes, but the etching solution and type to be used depends on the material
Mercury is a fair conductor of electricity , although it is a poor conductor of heat.
Carbon brushes used in DC machines because carbon is soft material and it does not generate spikes when contact with commutator
fets are used due to their high speeds
Metal Oxide Semiconductor. Usually used when referring to a specific type of transistor which uses this type of semiconductor material: the Field Effect Transistor (FET).
mud and fibers
How will be the therml conductivity and melting pointin Electrical contact materials used in switches brushes and relays must possess
Switches
Crossover cable
They use inertia switches.
Nowadays, a USB cable connection is commonly used.
15 types of
Micro switches are small snap-action switches generally used in some type of electronic circuit for some type of repetitive motion. In an air conditioning unit, a micro switch might send a signal to turn the compressor on or off when a room reaches a certain temperature.
ferromagnetic material
a smart material is a type of material used that can be changed by some of its own probities
A good electrical contact requires a clean metal to metal surface, and sufficient force to bring these clean surfaces into intimate contact. Gold is often used as a plating for contacts to aid this function. In some sealed environment switches, mercury is added to reduce the contact resistance (magnetic switches) .
An intransic material is a material that have been used in doping process.There are two type of intrinsic material n type and p type.