0
When measuring resistance should there be a voltage applied to the resistor?
Wiki User
∙ 10y ago
No, the meter used to make the measurement will be applying whatever voltage to the resistor it needs to make the measurement. Any additional voltage will disturb this, resulting in at least an incorrect reading and at worst damaging or destroying the meter.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How much current will flow through a 2.4 kilohm resistor when 7.2 kilovolts is applied?
Divide the voltage by the resistance in order to obtain your answer.
What are the losses in resistors?
The power lost in a resistor is(the current through the resistor) times (the resistance) watts. That's the same thing as(the voltage across the resistor)/(the resistance)watts.
When checking resistance does the power have to be off?
Short answer: yes. Most modern multimeters will not be damaged by external power when measuring resistance. But they will give erroneous readings. It is best to remove the power and disconnect the measured resistance from the larger circuit. A multimeter determines resistance by applying a small voltage, and measuring the resulting current. If the resistor has an external voltage source, then it will interfere with the measurement. Furthermore, if the resistance is connected to a larger circuit, then the resistance of this larger circuit will also be involved.
Voltage across resistor is doubled the current is?
Ohm's law states that the voltage across a resistor is the product of the current times the Resistance or V=I x R (I times R). V is Voltage, R is Resistance, and I is Current or Amperage. So if the Voltage is doubled and Resistance stays the same, the Current will be doubled.
The resistor in an R-L series circuit has a voltage drop of 53V and the inductor has a voltage drop of 28V what is the applied voltage of the circuit?
The applied voltage is 53+28 = 81V.
What does resistor perform?
A resistor's resistance is measured in ohms. The higher the resistance the less current will flow with a constant voltage applied across the resistor. In terms of Ohm's Law Voltage = Current x Resistance.
What happens to the applied voltage when a change in circuit resistance occurs?
When a dc supply is connected to a resistor, current flows. The current in amps is equal to the supply voltage divided by the resistance in ohms. The power used is the voltage times the current, and that appears as heat in the resistor, which might become hot to touch.
If the resistance in the circuit is increased what will happen to the current and voltage?
* resistance increases voltage. Adding more resistance to a circuit will alter the circuit pathway(s) and that change will force a change in voltage, current or both. Adding resistance will affect circuit voltage and current differently depending on whether that resistance is added in series or parallel. (In the question asked, it was not specified.) For a series circuit with one or more resistors, adding resistance in series will reduce total current and will reduce the voltage drop across each existing resistor. (Less current through a resistor means less voltage drop across it.) Total voltage in the circuit will remain the same. (The rule being that the total applied voltage is said to be dropped or felt across the circuit as a whole.) And the sum of the voltage drops in a series circuit is equal to the applied voltage, of course. If resistance is added in parallel to a circuit with one existing circuit resistor, total current in the circuit will increase, and the voltage across the added resistor will be the same as it for the one existing resistor and will be equal to the applied voltage. (The rule being that if only one resistor is in a circuit, hooking another resistor in parallel will have no effect on the voltage drop across or current flow through that single original resistor.) Hooking another resistor across one resistor in a series circuit that has two or more existing resistors will result in an increase in total current in the circuit, an increase in the voltage drop across the other resistors in the circuit, and a decrease in the voltage drop across the resistor across which the newly added resistor has been connected. The newly added resistor will, of course, have the same voltage drop as the resistor across which it is connected.
If the volts going in equals 5 and there is a resistance that equals 6 what would be the volts coming out?
The question is a bit ambiguous, but I will try to address it. If the 6 ohm resistance is in series with another resistance then some of the 5 volts would be dropped across the 6 ohm resistance and the remainder of the voltage would be dropped across the other resistance. To calculate the voltage, use the 'resistor voltage divider equation' (Google it). If the 5 volts is applied across only a 6 ohm resistance, then the top of the resistor is at 5 volts and the bottom of the resistor would be at 0 volts. The resistor would drop all of the voltage.
How much current will flow through a 12 ohm resistor if 6 volts are applied across it?
Voltage / Resistance = Current, you do the math
Is a voltmeter a linear scale?
This is because the resistance is measured by applying a fixed voltage to the resistor and measuring the current. Since I = V/R, the current/resistance relation is non-linear.
Does voltage flow across or through a resistor?
No. If a voltage is applied across a resistor, a current flows through it.
How do you test leakage on equipment?
by measuring the insulation resistance then by usig the formula for finding leakage current leakage current =voltage applied /resistance measured by megger.
How much current will flow through a 2.4 kilohm resistor when 7.2 kilovolts is applied?
Divide the voltage by the resistance in order to obtain your answer.
Which resistor of a series circuit receives the larget voltage drop?
The resistor with the most resistance.
What happens to voltage when resistance increases?
Ohm's law states that "The current is directly proportional to the applied EMF (voltage) and inversely proportional to the resistance in the circuit." <<>> if resistor exists, resistance decreases according to ohm's law, current is directly proportional to voltage and current is inversely proportional to resistance it means as current increases, voltage increases. resistance increases, current decreases so as voltage if there is no resistor, there should be no resistance except internal resistance of voltmeter and ammeter
What is power factor of resistor?
A resistor doesn't have a power factor. However, if a circuit is pure resistance in nature the power factor will be one when a voltage is applied and a current flows in the circuit. The power factor is a measure of the relative phases of the current and voltage in a circuit.
