because you are switch the hot leg, so it can be turn on an off.
If your light fixture doesn't work after changing the light bulb, it could be due to a few reasons. The new bulb might be faulty or not properly screwed in. Additionally, there could be an issue with the fixture itself, such as a blown fuse or a tripped circuit breaker. Lastly, check the switch to ensure it's functioning correctly.
The circuit will not work. In a three way lighting circuit system the middle switch needs to cross the traveller wires to be effective. A double pole switch in the circuit will just open both traveller wires and disrupt the current flow in both wires. No current flow, no lights.
In a torch (flashlight), the current passes from the positive terminal, through the bulb, and returns back in the negative terminals, making a complete circuit. When the switch is moved to the on position, a metal piece inside the case touches the positive terminals of the battery, the circuit is completed, and the torch turns on. Move the switch to the off position, the metal piece no longer touches the positive terminals of the battery, and the torch turns off.
An electric circuit is a closed loop that allows a flow of electrons to begin from a source of the electrons and return to the same source. Some of the energy carried by the current from the source may or may not be released to perform useful work. Because of the resistance of the materials in the circuit, some of the energy carried by the current is always lost as heat emitted from the circuit into the surrounding environment. The flow of electrons around the closed loop is called an electric current. The source of the electrons must be a chemical battery or a mechanical generator which produces a potential difference, also known as a voltage.
The regular switch just connects in the circuit the same way as the dimmer switch came out. If the dimmer switch had its own wires the only difference will be is you will have to supply your own wires from the new switch to the existing connection. IF YOU ARE NOT ALREADY SURE YOU CAN DO THIS JOBSAFELY AND COMPETENTLYREFER THIS WORK TO QUALIFIED PROFESSIONALS. If you do this work yourself, always turn off the power at the breaker box/fuse panel BEFORE you attempt to do any work AND always use a meter or voltage indicatorto insure the circuit is, in fact, de-energized.
The conducting path of a torch is a simple circuit: Battery to switch, switch to bulb, bulb back to battery. Provided the switch is on, and there are no breaks in the circuit wiring (and the bulb is good), the torch should work.
A torch is simply a circuit containing a battery, a bulb and a switch. The three components are connected in series (one after the other) to form a loop. The switch simply completes the circuit so that power flows from the battery to the bulb.
It will not work because it has to be closed so the electricity can go to the bulb.
a dry cell a resistor (a bulb maybe) wire switch
The cell has no more electricity and the bulb has blown.
A torch is simply a circuit containing a battery, a bulb and a switch. The three components are connected in series (one after the other) to form a loop. The switch simply completes the circuit so that power flows from the battery to the bulb.
The power to light switch in electrical circuits works by allowing or interrupting the flow of electricity to the light bulb. When the switch is turned on, it completes the circuit, allowing electricity to flow and light up the bulb. When the switch is turned off, it breaks the circuit, stopping the flow of electricity and turning off the light.
The switch needs to be in the "on" position for the circuit to work, allowing the flow of electricity through the circuit. In the "off" position, the switch breaks the circuit, stopping the flow of electricity.
Flashlight by light, battery, circuit, a hood and a reflective cup, circuit storehouse, switch, etc, the basic principle is the current from the battery, and then to the circuit, after adjusting circuit voltage and current, and then output to the light source for lighting.
Either close the circuit, or complete the circuit, should work here.
in a series circuit or it will not work. Put it after the bulb
A bad brake light switch or a bad headlight switch, or the power source of the fuse has a problem or break in the wire (circuit).