A standard oscilloscope is designed to measure voltage, you need a current probe for your oscilloscope to measure current.
Primary current is a flow to be measured that cannot be safely passed through the measuring device. A current transformer is used to provide a lower level, secondary current that can be passed safely through the measuring device. Primary current is measured as a secondary current, multiplied by the turns ratio in the current transformer.
CT(Current Transformer) is used to measure current flowing in the circuit. Current can be fully drawn or sensed in series condition. That's why , it is connected in series. In parallel , the current is divided; and hence the total current cannot be measured)
transformers cannot amplify!
This is a 'chicken and egg' situation. The motors in washing machines, etc., are driven by current but, without voltage, current cannot flow. You can't really separate the two.
It causes the electricity flow faster,which in term increases the electrical flow.CommentChanging a circuit's resistance doesn't cause 'electricity' to flow faster -or slower, come to that! First of all, 'electricity' isn't a quantity, so it cannot be measured, and it doesn't flow! If, by 'electricity', you mean 'current', well that isn't made to 'flow faster' either.If the supply voltage is constant, then increasing a circuit's resistance causes the magnitude of current to fall. This has nothing to do with its 'speed'!
Oscilloscopes only measure voltage over time. Current cannot be measured with an Oscilloscope directly, but can be measured indirectly. Measure the voltage across a known load and calculate the current.
Displacement current can not be measured by ammeter because it is the current which produce between the plate (space)due to change of electric flux and it is directly proportional to the rate of change of electric flux.
These masses cannot be measured directly; they are derived by calculation from other physical data.
motives are internal factors that drive behavior and are not directly observable. They are inferred based on a person's actions, emotions, and beliefs, making them hypothetical in nature. Motives can vary in intensity and can be influenced by a variety of internal and external factors.
i am not answering this stupid question
Kinetic energy cannot be measured directly, but the kinetic energy is just 1/2 times the mass times the velocity squared, and velocity can be measured directly.
A: no idea because it can
Primary current is a flow to be measured that cannot be safely passed through the measuring device. A current transformer is used to provide a lower level, secondary current that can be passed safely through the measuring device. Primary current is measured as a secondary current, multiplied by the turns ratio in the current transformer.
Outer Edge
No, goodwill is not a real asset. There are assets that are cannot be measured directly but in the end, they will make changes to the performance of the enterprise.
A: It must be connected across the device ammeters cannot measure DC current directly
A psychological construct is an abstract concept used by psychologists to help describe and explain human behaviors or experiences. It is a hypothetical attribute that cannot be directly measured, such as intelligence, personality traits, or motivation. Constructs help researchers develop theories and test hypotheses about human behavior.