0
What else can I help you with?
Can you use incandescent and fluorescent light bulbs in the same electric circuit?
Yes, that will not cause a problem.
What sentence can I use for Electric Circuits?
Electric circuits can be described as closed loops that allow electric current to flow, enabling the operation of various electrical devices. They consist of components such as resistors, capacitors, and power sources, which work together to control and manage the flow of electricity. Understanding electric circuits is essential for designing and troubleshooting electrical systems.
What is electical circuits?
It is a way in which electrons from a voltage or current source stream. Electric current stream in a shut way is called an electric circuit. The point where those electrons enter an electrical circuit is known as the source of electrons.
Why do electric circuits need to use conductors?
Without conductors, electrons do not flow where you want them to flow. An electrical circuit is a flow of electrons.
How do you get half of the voltage from a DC supply circuit?
By using a voltage divider, that is two resistors of the same value in series across the DC supply. Half of the supply voltage will be at the point where the two resistors is connected. But how much wattage of those resistors is also an issue.
Can you use a battery to make electricity?
make a electric circuit,by using resistors,cll then electricity is produced.
Why do you use resistor in electronics?
we use resistors to offer opposition to the flow of electric current. Resistors absorbs power from the circuit and convert it into heat that is why they are normally rated for the maximum amount of power that they can salfely handle
Does an electric circuit have a beaker?
No, an electric circuit does not have a beaker. A beaker is a container used for holding liquids, whereas an electric circuit consists of components like wires, batteries, resistors, and switches that allow electricity to flow in a specific path.
What resistors do in oscillator circuit?
The same thing they do in every circuit, resist the flow of electricity. That being said there are Many types of ossilators, and they can use resistors for many purposes.
Why do you use resistors and capacitors in any electronic circuit?
because their effects are desired to make the circuit work
Which device could you use in a circuit to limit or reduce the electric current?
A resistor is a device commonly used in a circuit to limit or reduce electric current. By providing resistance, it restricts the flow of current according to Ohm's Law, which states that current is inversely proportional to resistance. Additionally, variable resistors, such as potentiometers, can be used to adjust the level of resistance and, consequently, the current in a circuit.
Are there diagonal resistors in an electric circuit?
I must tell you that I've been building, troubleshooting, and studying electronics (in that order) for more than a half century, and this is the first time I have ever encountered the concept of a "diagonal resistor". I really should let this question pass, because I really have no idea what it means. But I'm somehow drawn to it. At the frequencies of devices that even use discrete resistors any more, the physical position and orientation of the resistors has no effect on their electrical characteristics or performance in the circuit. If the position mattered, then there would be a big red "THIS END UP" arrow on every transistor radio and boombox. And if, by chance, you're referring to the presentation of resistors on electrical schematic diagrams, please relax. The arrangement of the components and their symbols on the schematic is completely a matter of making a clear drawing, and has absolutely no relationship to their physical arrangement in the circuit when it's constructed. At least not until you get into microwave devices, and at that point, trust me, you and I would not even recognize a resistor in the circuit if we were looking at one.
What do you use to protect an electric circuit?
A fusible link
Why do you use resistors and capacitors in a circuit?
resistors and capacitors are used in order to create a path for the current , for the resistivity of the current , for the storage of the current.AnswerResistors don't just 'resist' electric current, they create a predictable change in voltage (electric potential) from one side to the other, so they can be used to adjust the expected voltage level at each point in a circuit.In an electric circuit with an unchanging current and voltage, capacitors simply store current and wait for something to change.In the more common electronic case of a circuit with voltage fluctuations, each capacitor is effectively a high-pass filter -- it permits quickly-fluctuating voltages to pass through, but reduces or stops slowly-fluctuating voltages.
What is a parilel circuit?
A parallel circuit is one where the elements in question are connected "side-by-side". The term is generally use to contrast against a series circuit where the elements are connected "end-to-end". As an example take two resistors and arbitrarily label the leads "A" and "B". If you connect the two resistors to each other such that A on one is connected to A on the other and B on the one is connected to B on the other, you have created a parallel connection of the two resistors.
How calculated the value of resistor that is to be used in particular circuit?
To read the value of a resistor: Resistors are color coded, you can use the chart found below And how accurate the values of resistors are is their tolerance, also found in the chart
Would I have to use 4 resistors for 4 LEDs in a circuit?
Yes, each LED should have its own means of current limiting.
