0
Why does a transformer blow the circuit breaker on the primary side if it is not connected to a load on the secondary side?
Wiki User
∙ 12y ago
A normal transformer should not blow the primary side breaker when it is not connected to a load on the secondary. If it does, something is wrong. Check for shorted or burned windings. Make sure that it is indeed disconnected from the load - it might still be connected to something that is also presenting a fault.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
When the transformer is connected to the power source the secondary current is 0 what is the possible fault in the transformer?
A secondary current of 0 would suggest to me that the secondary circuit is open. A normally operating circuit with zero current flow would be very unusual. No load in secondary circuit. No secondary current can also be attributed to the primary power source open or an open primary winding.
What are the limitations of power supply?
Power limitation transformer circuit structure of power supply, including: an electromagnetic interference filter unit, a rectifying unit, a power factor correction section, a transformer having a primary input terminal and secondary input terminal, a pulse controlling unit connected with the secondary input terminal of the transformer, a primary power limitation circuit and at least one secondary power limitation circuit, an output current controlling unit and an output voltage controlling unit. The input terminal of the output current controlling unit is connected with the secondary output terminal of the transformer. The primary output terminal and secondary output terminal of the output current controlling unit are respectively serially connected with the primary and secondary power limitation circuits. The input terminal of the output voltage controlling unit is connected with the secondary output terminal of the transformer. The output terminal of the output voltage controlling unit is connected with the secondary power limitation circuit for controlling the magnitude of the voltage and current of the primary and secondary power limitation circuits so as to control the output power.
Must wires be connected to breaker box?
It should be connected to circuit breaker. Circuit breaker will automatically discontinue the flow of electricity if it detects faulty condition.
What is the difference between transformers and autotransformers?
A transformer or, more-properly, a mutual transformer, has two windings, the primary and the secondary, which are electrically-isolated from each other, with the secondary voltage induced through mutual induction. An autotransformerconsists of one tapped winding, so the secondary circuit is not electrically isolated from the primary circuit. An autotransformer may be used to either increase or decrease the primary voltage, depending how it is connected.
What is use of bushing in transformer?
A bushing is a hollow insulator, used with transformers and circuit breakers. It provides a means by which an energised conductor can pass from the outside to the inside of the transformer or circuit breaker.
How can I get 230 volt single pole wire from my house panel?
In North America you can not obtain 230 volts from just one single pole breaker. The distribution is like this, from a one pole breaker to neutral is 120 volts. From an adjacent breaker to neutral is 120 volts. From the adjacent breaker to adjacent breaker (breakers situated beside each other) the voltage will be 230 volts.If you want to incorporate a 120 to 230 volt transformer into the circuit you can obtain 230 volts. The primary side of the transformer will be connected to the 120 volt circuit and the secondary side of the transformer will output 230 volts. The transformer must be sized to the load amperage or the load wattage of the connected 230 volt load.
In D.C supply the transformer is not connected why?
In a DC power supply a transformer is connected. The only time there would be no transformer used would be if the DC voltage wanted was 120 VDC. The transformer in the power supply is connected to 120 VAC on the primary side and the secondary side of the transformer is connected to either a half wave or a full wave diode bridge. The voltage out of the diode bridge will be the same output voltage potential as the transformer's secondary voltage but it will be a DC (Direct Current) potential.Reading the question in another way, transformers are not connected in a DC circuit. The reason being is that the transformer operates on a collapsing magnetic field. This field induces a voltage into the secondary side of the transformer. Since the DC circuit does not operate on the principle of a collapsing field except when the circuit is opened, the transformer would not operate as a transformer should..
When the transformer is connected to the power source the secondary current is 0 what is the possible fault in the transformer?
A secondary current of 0 would suggest to me that the secondary circuit is open. A normally operating circuit with zero current flow would be very unusual. No load in secondary circuit. No secondary current can also be attributed to the primary power source open or an open primary winding.
What is a circuit breaker connected in?
it is connected in a box
What should be the short circuit setting of the feeder breaker of a transformer so that it does not trip on short circuit fault in secondary side?
You need to model this - the line impedance and transformer impedance, and the voltage will determine this. There is no "one size fits all".
What are the limitations of power supply?
Power limitation transformer circuit structure of power supply, including: an electromagnetic interference filter unit, a rectifying unit, a power factor correction section, a transformer having a primary input terminal and secondary input terminal, a pulse controlling unit connected with the secondary input terminal of the transformer, a primary power limitation circuit and at least one secondary power limitation circuit, an output current controlling unit and an output voltage controlling unit. The input terminal of the output current controlling unit is connected with the secondary output terminal of the transformer. The primary output terminal and secondary output terminal of the output current controlling unit are respectively serially connected with the primary and secondary power limitation circuits. The input terminal of the output voltage controlling unit is connected with the secondary output terminal of the transformer. The output terminal of the output voltage controlling unit is connected with the secondary power limitation circuit for controlling the magnitude of the voltage and current of the primary and secondary power limitation circuits so as to control the output power.
Must wires be connected to breaker box?
It should be connected to circuit breaker. Circuit breaker will automatically discontinue the flow of electricity if it detects faulty condition.
What is a high voltage circuit primary circuit secondary circuit tertiary circuit?
The terms 'primary', 'secondary', and 'tertiary' winding has absolutely nothing whatsoever to do with voltage levels. The primary winding is simply that winding connected to the supply, while the secondary winding is that winding connected to the load. The voltages of these windings depend on whether you are dealing with a step-up or step-down transformer.
What is principle of Current transformer?
why does have to short-circuit secondary wire of current transformer ?
How current transformer measure current?
A current transformer doesn't 'measure current'. It merely reduces a large current flowing through its primary to a smaller current which can be read by an ammeter connected to its secondary. At the same time, it electrically isolates the secondary circuit from the primary circuit, which is essential if the primary circuit is part of a high-voltage system.
How do you identify the circuit breaker?
circuit breakers are connected in series manner in the circuit.
Why is the wattmeter connected at the primary side of the transformer?
In general, you can install a wattmeter on the primary or the secondary side of a transformer (it depends what you are trying to measure). But if you are conducting an open- and short-circuit test (to find the transformer's losses), then the wattmeter is connected to the primary side because you want to measure the total (primary + secondary) losses and that is only achievable from the primary side.
