0
A: A Binary code represent a binary number 0.1.2.4.8. etc. that is why it is called a weighted number
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What does a BCD invalid code detector do?
detects the invalid portion of the bcd number codes (1010-1111)
What is the difference between a BCD to decimal decoder and a BCD to 7-segment decoder?
A: A BCD code must be decoded to provide a seven digit output to the 7 bars display that is the only way to see the binary number visually.
What is a weighted code?
Weighted code, also known as positional notation or place-value notation, is the method of encoding numbers. Its use of the same symbol for different orders of magnitude is what distinguishes it from other notations.
What is a weighted amplifier?
if each input voltage is amplified by a different factor,in other words,weighted differently at the output,the circuit is then called a scaling or weighted amlifier.
Design Excess 3 to bcd using full adder?
you must use HA
What is the difference between weighted and non weighted codes?
what is weighted codes: The decimal value of a code is obtained summing up the positional values. weghted binary code s are those which obey positional weighting principle. each position of number represents a specific weight. There are millions of weighted code The most common one is 8421 Non weighted codes: This codes are not positionaly weghted. each position with in the binary no is not assgned to afixed value.Examples of nonweghted code is ASCCI, GREY CODE, EBCDIC CODE etc
Examples of weighted and non weighted codes?
Weighted codes assign different significance to each digit in a number representation, such as 8421 BCD code assigns weights of 8, 4, 2, and 1 respectively to each bit. In contrast, non-weighted codes like Gray code do not follow a positional weight pattern, where only one bit changes at a time when moving from one value to another to reduce errors in analog-to-digital conversion systems.
What are the 4 an invalid BCD code?
BCD code isn't valid for these integers , 10 , 11 , 12 , 13 , 14 i.e if these integers ae converted to binary code they 'd be called wrong BCD
What is a 4 BCD code?
A 4 BCD code is a 4 decimal-digit BCD code, thus a 16 digit binary-code. You take the decimal number 3545. It's BCD code is 0011 0101 0100 0101 where every 4 bits represent a decimal digit.
5421 is example for weighted or non weighted code?
weighted
What is weighted code give you its example?
Weighted codes have there bits presented in weightage. Simply put weighted codes are codes used for arithmetic operation. And unweighted codes there are no values for the bits. Simply put they can not be used for calculations. Examples are 8421 (BCD) binary, hex, octal ETC. For the former And grey codes, excess-3 etc. For the later.
What is non weighted code give you its example?
Weighted codes have there bits presented in weightage. Simply put weighted codes are codes used for arithmetic operation. And unweighted codes there are no values for the bits. Simply put they can not be used for calculations. Examples are 8421 (BCD) binary, hex, octal ETC. For the former And grey codes, excess-3 etc. For the later.
What does a BCD invalid code detector do?
detects the invalid portion of the bcd number codes (1010-1111)
How i can Design a BCD-to-excess-3 code converter with a BCD-to-decimal decoder and four OR gates?
i dont know 1001+1001 - Constructing a BCD-to-excess-3-code converter with a 4-bitt adder we know that the excess-3 code digit is obtained by adding three to the corresponding BCD digit. To change the circuit to an excess-3-to-BCD-code converter we feed BCD-code to the 4-bit adder as the first operand. Then feed constant 3 as the second operand. The output is the corresponding excess-3 code. To make it a BCD to excess-3 converter, we feed the 2's complement of 3 as the second operand. - Constructing a BCD-to-excess-3-code converter with a 4-bitt adder we know that the excess-3 code digit is obtained by adding three to the corresponding BCD digit. To change the circuit to an excess-3-to-BCD-code converter we feed BCD-code to the 4-bit adder as the first operand. Then feed constant 3 as the second operand. The output is the corresponding excess-3 code. To make it a BCD to excess-3 converter, we feed the 2's complement of 3 as the second operand.
What are the advantages of bcd code?
advantages of bcd codes:-- it combine all basic numbers- it is easilly understand by human beings
What is the sum of weights in a self complementing BCD code?
9
BCD code for 47?
0100 0111 4 7
