Current or AMPS are what the appliance draws or load of the appliance. So, if you have a say 10,000 amps going thru a cable rated for say 1,000 amps , guess what ,the cable over heats and either will melt or at least catch fire.
The mains lead in a strip heater serves as the primary power supply connection between the heater and the electrical outlet. It is typically a flexible insulated cable that carries the electrical current from the source to the heating element within the heater. The mains lead is essential for providing the necessary power for the heater to generate heat and maintain the desired temperature. It is important to ensure that the mains lead is properly connected and in good condition to prevent any electrical hazards or malfunctions.
The electrical supply authority for your area
because your body is controlled by electric impulses that are far weaker. Mains power can knock your bodys signals out, causing your heart to stop pumping.
Current limiting is the practice in electrical or electronic circuits of imposing an upper limit on the current. The simplest form of current limiting in mains is fuse.
The rising mains are essentially used in electrical distribution system in buildings two storied and above. It is basically used in indoor applications. Nowadays vertical type distribution is normally used as it is more convenient and reliable compared to rising cable system.
Passing too much current through a mains cable can lead to overheating, which can result in the insulation melting and causing a short circuit. This can pose a fire hazard and increase the risk of electric shocks. Additionally, exceeding the current-carrying capacity of the cable can damage the electrical components connected to it.
The Active wire is always either Red (in a 3 core Red, Black and Green cable) or Brown (in a 3 core Brown, Blue and Green/Yellow cable). You can also be electrocuted by the neutral (Black or Blue) wire if the active is still supplying current through a device. The only truly safe way to handle mains wiring is to completely isolate the circuit at the fuse board.
· A power cord, line cord or mains cable is known as the supply cable, which temporarily connects an appliance to the mains electricity supply to a wall socket. · A supply cable connects the refrigerator to the mains electricity supply via a wall socket.
· A power cord, line cord or mains cable is known as the supply cable, which temporarily connects an appliance to the mains electricity supply to a wall socket. · A supply cable connects the refrigerator to the mains electricity supply via a wall socket.
The mains lead in a strip heater serves as the primary power supply connection between the heater and the electrical outlet. It is typically a flexible insulated cable that carries the electrical current from the source to the heating element within the heater. The mains lead is essential for providing the necessary power for the heater to generate heat and maintain the desired temperature. It is important to ensure that the mains lead is properly connected and in good condition to prevent any electrical hazards or malfunctions.
Mains supply provides alternative current while battery provides direct current.
You get power, which is voltage * current (so both!).
In most countries, mains power typically supplies electricity at 120 or 240 volts. The current flowing through mains power can vary depending on the electrical load, but it is typically around 10-15 amps for household circuits.
A 'service mains' is not associated with an electricity 'transmission' system, but with a low-voltage 'distribution' system. The service mains is the name given to the cable that connects a building to the low-voltage mains supply.
Two main reasons: - voltage - batteries usually(but not always) have such a low voltage that they can't push a dangerous current through a human body. - muscle interaction - Batteries are DC (direct current) while mains are AC (alternating current). And AC current will cause the muscles to spasm and lock, so if you were to accidentally grasp something electric, it'll be really hard to break free. But don't get this wrong. If you know what you're doing, it's entirely possible to kill yourself with nothing but a 12-volt battery.
The 1.5mm and 2.5mm in mains cable refer to the cross-sectional area of the conductors, specifically the copper or aluminum wires within the cable. This measurement indicates the thickness of the wires, which affects the cable's current-carrying capacity and resistance. Generally, a larger cross-sectional area (like 2.5mm) can handle higher electrical loads safely compared to a smaller one (like 1.5mm). Therefore, the choice between these sizes depends on the electrical demands of the application.
The electrical supply authority for your area