0
Why is it important to conduct inspections and checks before connecting to the supply?
Wiki User
∙ 6y ago
Inspection and checks to ensure no mistakes are made, so that the safety of equipment and the user is ensured..
Wiki User
∙ 6y ago
Add your answer:
Earn +20 pts
What happen when you use 6.6kV instead of 11kV surge arrester?
The 6.6KV device will conduct before the 11KV device, quite possibly even in normal operation. Don't use it this way!
How do you connect your two 250w solar panels in a 24v system?
The best would be parallel as these panels normally have > 30V output voltage, which would be sufficient for a 24V inverter/load.There is also a risk of overvoltage on your charge controller connecting them in series, check if your charge contrroller can accommodate the sum of the max output voltage of the 2 panels before attemptins series on this configuration.There are additional efficiency advantages of connecting your panels parallel.
Why is a 3-way switch important?
for rooms with two entrances, you don't have to cross a darkened room before turning on the light, or after turning it off.
How do you short the capacitor?
There is no resistance between cathode and anode when measured with a multimeter. You can also lick the terminals. If charged, it'll taste much like the terminals of a 9v battery, which, interestingly, tastes much like going down on a girl.
Why the polarity of transformer is important?
a polarity test is a test which use to check the polarity of tranformer.the rision of this test to running the two or more transformer in parallel.like bettry situation or to fin the terminals
Why is it important to set a meter to the highest voltage range before connecting it into a circuit?
Sorry idont know
Information that identifies the failure rate of healthty food and fitness business?
This would be found in the inspections. Each restaurant has to go through inspections before opening as well as periodically each year.
What must be disconnected from a circuit under test before connecting the ohm meter to the circuit?
You must always disconnect the power supply from the circuit before connecting an ohmmeter.otherwise the meter may be damaged.
Do home buyers need inspections and how much is the price?
It is very important to have a home inspected before you buy a home. Many sellers these days try to skimp out on things and you may end up buying a home with a collapsing roof. Be wary!
Why is it important for a business to conduct market research before locating a new branch in an overseas country?
To determine that the local market is strong enough to actually support a store there.
Crime committed before law was ratified?
is not a crime. before the point of ratification (or the coming in to force) of a price of legislation that crinalizes conduct...the conduct in question is not crinal.
Home Evaluation Worksheet?
Get StartedThe Home Evaluation Worksheet provides a convenient format for maintaining information regarding the various properties that a buyer may inspect as part of the search for a residence. The buyer can gather information regarding location, style, size, and other features of the various residences. These features can then be compared.This worksheet also provides an important checklist regarding inspections that should be completed before closing on the purchase of the residence. These inspections include inspections of appliances, smoke detectors, security systems, and heating and cooling systems, as well as inspections for radon gas, asbestos, and termites or other pests.This program will produce a worksheet that you can take with you when inspecting the property and fill out at that time.
What should you check before permanently connecting a meter to a circuit?
flash check
Why is it advised to clean the ends of connecting wires before connecting them?
because electricity flows very nicely through copper but not so well through dirt.
What is paralleling of transaformers?
Paralleling transformers will increase the effective capacity available to the load. There are important requirements before transformers can be paralleled, so it's simply not the case of connecting any two transformers in parallel.
How do you conduct a baseline assessment?
You get a line and base it before assessing it
Do you have to charge ipod touch before connecting it to itunes?
yes you do my cousin has one too
