Shift registers contain multiple "flip flops" that can be set to represent a bit value (0 or 1). These values can be retrieved later and so the registers can function as memory.
Shift registers contain multiple "flip flops" that can be set to represent a bit value (0 or 1). These alue can be retrieved later and so the registers can function as memory.
Resistors, capacitors, inductors, transformers, diodes, transistors, integrated circuits, power sources are the basic building blocks.
DCS is advanced version of PLC and DCS works in real time frame while PLC not. There is no monitoring devices in PLC like DCS.
The two basic types of transistors are the NPN transistorand the PNP transistor. Certainly there are many other semiconductor devices, but these are arguably the two basic ones.
A typical multimeter can measure: * AC & DC voltage (volt) * AC & DC current (amp) * resistance (ohm)
The basic function of a transformer is to change voltage levels.
A byte (character) is the basic storage unit in memory.
The basic element are:MonitorPeripherals KeyboardMouseSpeakersThe Tower The MotherboardThe CPU (Central Processing Unit)RAM (Memory)Hard Drive (Main Storage Device)CD or DVD DriveOther (Card Reader, Optional Sound Card, etc)
Input devices include the following:1. Mouse2. Keyboard3. Web Cam4. Microphone5. Scanner6. Drawing PadOutput devices include the following:1. Monitor2. Speakers3. PrinterSome storage/media devices can be considered input or output depending on what they're doing at the time. For instance, a CD-ROM drive can be considered an input device because data from a CD is put onto the computer. However, that same drive can also have burning capabilities, and in that function it's considered an output device because information is being put onto the CD from the computer. The same goes for other storage/media devices such as memory cards, USB thumb-drives, and the like.
Stomach crunches are the core of all stomach exercises. They are considered as basic abdominal exercises. You can do it at home, without any devices.
Yes, any computer will need a number of basic components to function, and a number of peripheral devices. Its basic components are a motherboard, processor and memory. A computer will also need a monitor, harddrive and keyboard to function properly. Peripheral devices for input include a keyboard, mouse, webcam, scanner or drawing pad. Output devices include a monitor or printer.
Read-only memory or ROM is a storage medium of computers and electronic devices. It is a permanent memory storage that supports all the required instruction for a computer to start.
register has the same clock. counter do not need to have the same clock.
The five components of a computer:input devices, output devices,system unit,storage devices,and communications devices.
1)Job management2)Communication between the user and hardware through user interface3)Data management4)Resource Management
a "reduced" instruction set, consisting only of the instructions most commonly generated by compilersall arithmetic and logic instructions operate only register to register using an internal register setonly basic arithmetic and logic operations are built in, others handled in softwareall memory access instructions are simple register load or store instructionsonly one memory access mode built in, others handled in softwareinstructions always aligned whole words (no short or unaligned instructions)significant degree of pipeline parallelism in the hardware to optimize hardware efficiencyetc.
Things like computer warranty, determine what type of minimum requirements you have and some basic terminology that will help you understand what the salesman is talking about. processing speed type of computer task to be done by the computer type of peripheral devices to be used memory capacity cost
a bit.