Circumduction. i think im not for sure though.
Injecting power into the higher voltage winding of a transformer will make it act as a step down transformer; injecting power into the lower voltage winding will make it act as a step up transformer. A transformer can be used both ways.
A basic, two-winding, transformer consists of two, separate, coils (called windings) wound around a laminated silicon-steel core. The winding connected to the supply (input) is called the primary winding, and the winding supplying the load is called the secondary winding. Alternating current flowing in the primary winding sets up an alternating magnetic field in the core which induces a voltage into the secondary winding. If there are fewer turns in the secondary winding, then the secondary voltage is lower than the primary voltage. If there are more turns in the secondary winding, then the secondary voltage is higher than the primary voltage.
For a step-down transformer, its secondary winding will be the LV winding. For a step-up transformer, its primary winding will be its LV winding.
As it is clear form your question that it will be LV winding.
A step-up transformer produces a voltage across its secondary winding which is higher than its primary winding. The secondary winding is connected to the load, while the primary winding is connected to the supply.
circumduction
Winding up for a pitch can properly be called the "pitching motion" or "windup." This refers to the sequence of movements a pitcher uses to prepare for delivering the ball, which includes gathering momentum and positioning the body for an effective throw. The windup is crucial for generating speed and control in the pitch.
Winding up for a pitch involves storing potential energy in the pitcher's muscles and body position. As the pitcher releases the ball, the potential energy is converted into kinetic energy, resulting in the fast motion of the pitch.
Injecting power into the higher voltage winding of a transformer will make it act as a step down transformer; injecting power into the lower voltage winding will make it act as a step up transformer. A transformer can be used both ways.
there are three modes of winding up of a company:- 1. winding up by the court i.e., compulsory winding up(sec433 to 483) 2. voluntary winding up (sec. 484 to 521). this may be- (a) members voluntary winding up. (b) creditors voluntary winding up. 3. winding up subject to supervision of court.
A basic, two-winding, transformer consists of two, separate, coils (called windings) wound around a laminated silicon-steel core. The winding connected to the supply (input) is called the primary winding, and the winding supplying the load is called the secondary winding. Alternating current flowing in the primary winding sets up an alternating magnetic field in the core which induces a voltage into the secondary winding. If there are fewer turns in the secondary winding, then the secondary voltage is lower than the primary voltage. If there are more turns in the secondary winding, then the secondary voltage is higher than the primary voltage.
benefit of winding up
it means to liquidation the company that we can do it by three methods winding up by court voluntary winding up and winding up subject to supervition of the court
You Winding Me Up was created on 2010-12-08.
Answer 1Kinetic. Remember, kinetic energy is the energy of movement.Answer 2If one considers winding up for the pitch as analogous to winding up the spring on a crossbow, then you are converting kinetic energy (the motion produced by your arms) to potential "elastic" energy. Releasing the catch on the bow then converts the stored potential energy to the kinetic energy of the bolt as it flies away.Of course people are not crossbows, and the interplay of forces and motions is a bit more complex.Added:Answer two's analogy is flawed as the potential energy on the cross bow winding is not potential until the mechanism is stopped and locked. Until that point the energy is kinetic to potential. A pitcher winding up does not store potential energy as a locked in place cross bow bolt does.Added 2:Hence my statement that winding up a crossbow is *converting* kinetic energy to potential, while releasing the crossbow *converts* potential to kinetic energy.But as already noted, comparing winding up for a pitch to winding up a crossbow is probably not very accurate anyway.When a pitcher winds himself up for a pitch, he positions himself in such a way as to be able to convert the maximum amount of *chemical* energy into kinetic energy. At least, that's how I see it.
Winding up for a pitch involves converting potential energy (stored energy due to position or configuration) into kinetic energy (energy of motion) when the pitcher releases the ball.
For a step-down transformer, its secondary winding will be the LV winding. For a step-up transformer, its primary winding will be its LV winding.