Red - active, (commonly known as your live cable)
Black - Neutral
Green - Earth
If there are three attachment points then you have a ground and two hots. The ground goes to the green screw and the hot wires can be connected to either hot screw. If there are four wires then the hots will likely be red and black. The white wire is the common or neutral and the green or bare wire is ground.
When flexible cords are talked about the ground wire is in the conductor count. A four wire cord will have black, red, white, and green coloured wires in the flexible cable set. A three wire cord will have a black, white and green coloured wires in the cable set. To use a four wire cord to carry 220 volts just use the black, red and green wires. Connect to the cord ends. Black and red to the outside blade terminal screws and the green wire to the green ground screw. To use a three wire cord to carry 220 volts just use all of the wires. Black and white to the outside blade terminal screws and the green wire to the green ground screw.
The cracked plug can cause the wires to spark and cause a fire. When the wires are plugged into it where the crack is the wires can touch the socket and cause the fire.
On a 3 wire dryer cord there is no green wire. The white wire coming from the outlet is connected to ground or the green screw. The black and red wires are the hot wires.
white wires are neutral. green wires are ground wires.
The color of the wires in the electrical circuit are green, black, and white.
To wire a wall socket properly, first turn off the power to the circuit. Remove the old socket and connect the wires to the new socket following the color-coded terminals (typically black for hot, white for neutral, and green or bare for ground). Secure the wires with screws and attach the socket to the wall. Finally, turn the power back on and test the socket to ensure it is working correctly.
In electrical circuits, white wires are typically used as neutral wires, green wires are used as ground wires, and black wires are commonly used as hot wires.
Green wires are typically used for grounding, black wires are used for carrying electrical current, and white wires are used as neutral wires to complete the circuit.
The correct order of connecting the red, white, black, and green wires in a circuit is typically red to black, white to green.
The correct order of connecting the red, black, and green wires in a circuit is typically red to positive, black to negative, and green to ground.
Black wires are typically used for power supply, white wires are used for neutral connections, and green wires are used for grounding in electrical wiring.
The standard color coding for electrical wires is green for ground, black for hot, and white for neutral.
The different colors of wires used in electrical installations have specific meanings. Red wires are typically used for hot wires, white wires for neutral wires, green wires for ground wires, and black wires for hot wires as well.
If there are three attachment points then you have a ground and two hots. The ground goes to the green screw and the hot wires can be connected to either hot screw. If there are four wires then the hots will likely be red and black. The white wire is the common or neutral and the green or bare wire is ground.
Because the wires in plug OR socket are loose and arcing.
speaker is black-, blue with brownish stripe + on power connector their are 4 wires ,2 of them are black,1 green,last is black with green stripe