answersLogoWhite

0

form_title=Celiling Fan Installation form_header=7383 Have you already purchased the fan(s) you intend to use for this project?*= () Yes () No How do you regulate the ceiling fan ? (Tick everything that applies)*= [] Wall switch [] Pull string [] Remote control [] Don't know How high quality of a ceiling fan are you considering installing?*= () Economy grade () Medium grade () Premium grade () Don't Know Please specify what type of ceiling fan installation this is.*= () Need to remove an existing lighting fixture and install a ceiling fan () Need to install a ceiling fan in a new location () Need to replace existing ceiling fan

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Electrical Engineering

Does code require a new bath vent fan to be on a dedicated circuit?

No, the bath vent fan does not need a designated circuit. If this is a new installation install a three wire cable to the fixture from a two gang switch box. Cover plates for two gang boxes can be bought with a blank on one side and a switch on the other. At some time in the future a lighted fan enclosure may be installed. This will allow the light and fans to be operated independently.


How much current passes through the celling fan?

More information is needed to answer this question. Voltage, type of fan, horsepower of the fan or wattage of the fanareneeded to find what the current draw of the fan.


My light which has 4 candleabra bulbs made a loud popping sound and then blew out and the ceiling fan with that same light also stopped working when this happened and I am wondering why?

It sounds as though you had the hot wire in your fan itself or in the fan ceiling box short out. Not good. The wire is likely burnt in two or nearly. This often happens if a wire gets pinched during installation. The wire gets mechanically damaged and then it's just a matter of time before it shorts out. Unless you're qualified, ask a qualified electrician to repair it. If If you can't afford an electrician or don't know one who'll do it for cheap or free, then make sure the circuit breaker is off to the circuit. Then take the fan out of the ceiling box, and look for the damaged or loose wire and repair it.


What part of a hair dryer does the motor move?

It moves a fan. The fan is what causes the airflow in the hair dryer.


Sony BVW 70 - error code 14. What is it?

FAN MOTOR TROUBLE Fan Motor defective.

Related Questions

What are the basic steps in a Chinese fan dance?

1.On the celiling 2.Walk upside down on the celiling 3.Float on the celiling!!!


What is the purpose of the blue wire in a ceiling fan installation?

The purpose of the blue wire in a ceiling fan installation is to connect the light kit to the fan for controlling the light separately from the fan's motor.


What components are included in a ceiling fan installation kit?

A typical ceiling fan installation kit includes mounting hardware, screws, brackets, wires, a downrod, a canopy, and installation instructions.


What are the steps involved in a ceiling fan installation?

The steps involved in a ceiling fan installation include turning off the power, assembling the fan, attaching the mounting bracket, wiring the fan, attaching the fan blades, and testing the fan to ensure it is working properly.


What is the purpose of the red wire in a ceiling fan installation?

The red wire in a ceiling fan installation is typically used to connect the fan's light kit to a separate wall switch, allowing for independent control of the fan and light.


Whole house fan installation. www.suburbanfan.com?

What type of whole house fan is the best ?


What is the purpose of a ceiling fan bracket and how does it contribute to the installation and stability of a ceiling fan?

The purpose of a ceiling fan bracket is to securely attach the fan to the ceiling. It contributes to the installation and stability of the ceiling fan by providing a strong and stable connection point between the fan and the ceiling, ensuring that the fan is properly supported and balanced.


What is the correct ceiling fan wiring diagram with capacitor for installation?

The correct ceiling fan wiring diagram with capacitor for installation involves connecting the fan's motor to the capacitor and then to the power source. The capacitor helps regulate the fan's speed. It is important to follow the manufacturer's instructions and consult a professional if needed to ensure proper installation and safety.


What should I do if there is no ground wire for a ceiling fan installation?

If there is no ground wire for a ceiling fan installation, you should consult a licensed electrician to determine the best course of action to ensure the safety and proper functioning of the fan.


What are the best installation tips for a ceiling fan for a gazebo?

When installing a ceiling fan in a gazebo, make sure to choose a fan rated for outdoor use. Ensure the gazebo ceiling can support the weight of the fan. Use a UL-listed outdoor fan box for mounting. Follow manufacturer instructions carefully for wiring and installation. Consider hiring a professional electrician for safety and proper installation.


What is the purpose of a ceiling fan support box with brace kit and how does it help in the installation of a ceiling fan?

A ceiling fan support box with brace kit is used to securely mount a ceiling fan to the ceiling. It helps in the installation by providing a stable and safe support for the fan, ensuring that it is properly secured and balanced. This kit helps prevent the fan from falling or causing damage to the ceiling, making the installation process easier and safer.


Where can one get professional help for installation of a brushed nickel ceiling fan?

One can get professional help for installation of a brushed nickel ceiling fan from The Home Depot where they provide help with installation of all items. One can also find help by contacting installation engineers on Yelp.