100 gauge = 1/1000 of an inch. 1 inch = 25.4mm Therefore: 500 gauge = (5/1000) x 25.4mm = 0.127mm = 1.27 x 10-4m = 127 x 10-6m. As we know 10-6 is a micro meter Then: 500guage = 127 microns.
A 500 gauge polythene sheet is approximately 0.125 millimeters thick. The thickness is derived from the standard conversion where 1 gauge is equal to 0.254 millimeters. Therefore, 500 gauge translates to 500 x 0.254 mm, resulting in a thickness of about 127 millimeters, which is often rounded to 0.125 mm for practical purposes.
The weight of a mild steel (MS) sheet in millimeters (mm) gauge can be calculated using the formula: Weight (kg) = Length (m) × Width (m) × Thickness (mm) × Density (7850 kg/m³). For example, a 1mm thick MS sheet measuring 1m x 1m would weigh approximately 7.85 kg. The specific weight will vary based on the dimensions and thickness of the sheet.
36 x 36 inch is standard.
A formula for 60 Hz with reasonable ventilation: Imax = 7.73 x A^0.5 x p^0.39 A is the cross-section area in sq. mm and p is the circumference of the busbar's cross-section in mm. So for a busbar of 100 mm x 5 mm the maximum current is 1391 amps.
1 in = 25.4 mm ⇒ 36 in = 36 x 25.4 mm = 914.4 mm
14 x 36 = 504
x cm = 3.6 mm1 cm = 10 mm (direct variation, less mm, less cm)x/1 = 3.6/10x = 3.6/10x = .36Thus, 3.6 mm are .36 cm.
Long multiplication 36 X14 360 (10 x 36 = 360) 144 (4 x 36 = 144) 504 ==== The answer !!!!!
1 cm = 10 mm36 cm = (36 x 10) = 360 mm
22
14/36 x 100 = 38.8 recurring (that is, 38.8888..) Therefore, 14 is 38.8 recurring percent of 36.
x = 10 5 x 10 = 50 50 - 14 = 36 4 x 9 = 36
Divide by 25.4 to convert mm to inchesThen divide by 36 to convert inches to yards = 766 / (24.4 x 36) yards
Little tiny box (not hollow) with each side of 14mm
3x+50=6x+14 50-14=6x-3x 36=3x x=36 / 3 therefore x=12
252. 12 = 22 x 3 14 = 2 x 7 36 = 22 x 32 lcm = 22 x 32 x 7 = 252