0
What else can I help you with?
What is impact ampere in 50Hz motor connected to 60Hz?
What effect will be there on the motor (Induction) output power when a 100kW 50hz motor is connected to a 60hz power supply.
Can a 415v 50hz motor run on 380v 50hz?
no
How will work motor 460V 3ph 60Hz at 380V 3ph 50Hz power net?
It will not work at all.
Will a 500volt 50hz squirrel cage motor run on 380volts 50hz?
No, the voltage of 500 volts is too high to operate a 380 volt motor.
How can you run a 380v 50hz motor with 440v 60hz source?
Yes. It will make your motor a little faster though, so it depends on what you are powering with this motor. IE Can the piece of eguipment be ran faster?
What is impact ampere in 50Hz motor connected to 60Hz?
What effect will be there on the motor (Induction) output power when a 100kW 50hz motor is connected to a 60hz power supply.
Can a 415v 50hz motor run on 380v 50hz?
no
How will work motor 460V 3ph 60Hz at 380V 3ph 50Hz power net?
It will not work at all.
Can 3 phase 440 volt 50Hz motor run on 380 volt 50Hz supply?
Yes, But in this case the current will rise up by about 15% at full load. So if you will use the motor to drive any mechanical load take in your consideration the mechanical load Power (KW) must not exceed 85% of motor power (KW)
How can you determine if an electric motor is 50HZ or 60HZ if there is no name plate?
One way would be to hook it up to a supply (by itself, with no load) and measure the speed with a contact tachometer. If your supply is 60Hz, and the motor speed corresponded to one of the standard motor speeds, it would be a pretty safe bet you had a 60Hz motor. If the speed was about 20% faster than a standard speed, the motor is probably a 50Hz motor. Or 20% slower if you were running a 60Hz motor on 50Hz For instance, a 1750 RPM 50Hz motor would spin at about 2100 RPM if you ran it on 60Hz.
What size of wire should i use with a 50hz motor?
Depends on the current rating which should be on the motor.
Will a 500volt 50hz squirrel cage motor run on 380volts 50hz?
No, the voltage of 500 volts is too high to operate a 380 volt motor.
How many amps does a78kw 415volts 50 hz motor take?
To calculate the amperage, use the formula: Current (A) = Power (W) / (Voltage (V) * √3 * Power factor) Assuming a power factor of 0.8 for a typical motor, the current draw for a 78kW 415V motor at 50Hz would be approximately 111.58A.
What power is used in Norway?
220VAC 50Hz
What size of generator to run 5.5kw 400v 50Hz motor?
You need a 5.5kw generator to run a 5.5kw motor.
Is there anyway to get 120V 60hz from a 100V 50hz power supply?
A motor-generator or a solid state power converter can do this.Motor-generators are an old electromechanical technology. In this case you would use a 240V 50Hz synchronous motor and a 110V 60Hz generator with their shafts connected so the motor turns the generator.Solid state power converters use a high power rectifier to convert the input AC to DC, a precisely tuned oscillator to set the output frequency, and a high power class AB push-pull amplifier powered by the high voltage DC and driven by the oscillator to generate the output voltage.
Will a 230V 50Hz drain pump of a washing machine work on a 220V 60Hz?
No! Normally not, the recistance in the windings is to hig on 60Hz and the pump motor has not power enough to work propelly. This happened to myself when I connected my Whirpool AWE 7519 to 230V 60Hz. Europian model for 50Hz.
