answersLogoWhite

0

: This seems like a question from an electrical course, and is probably best answered by your course materials. : It's your test question, not ours, and there won't always be someone else to ask for the answer. Earn your diploma.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Engineering

What is a demodulator?

The process of separating the original information or SIGNAL from the MODULATED CARRIER. In the case of AMPLITUDE or FREQUENCY MODULATION it involves a device, called a demodulator or detector, which produces a signal corresponding to the instantaneous changes in amplitude or frequency, respectively. This signal corresponds to the original modulating signal


What is the relation between carrier frequency and modulating signal?

If the modulating system is AM (Amplitude Modulation) then the amplitude of the carrier wave changes with the amplitude of the modulation. On a specrum analyser that shows up as frequency sidebands. If the frequency of the carrier waves depends on the amplitude of the modulating signal that is called FM (frequency modulation). On a spectrum analyser that shows up as sidebands also.


What is collector modulation?

Collector modulation is the amplitude modulation in which modulator varies the collector voltage of a transistor.


Discussion about amplitude demodulator?

A modulator modulates the carrier frequency, while a demodulator detects the modulation on the carrier wave and recovers the original lower frequency waveform at the destination. For many years the modulated carrier wave was converted to a radio signal. Now it is often an electrical signal which is sent down a teleohone line; the information is usually a set of pulses going between computers. When computers are connected to each other in a two-way conversation, the MOdulator and DEModulator are combined into a single device called a MODEM.


What is the modulation of frequency?

It is a device or electronic circuit that changes the frequency of an oscillator according to the amplitude of modulating signal. For instance, if the modulation is linear, the modulator changes the frequency proportional to the amplitude of the modulating voltage.

Related Questions

89kHz sinusoidal signal is modulated using an amplitude modulator and a frequency modulator calculate the bandwdith requirement for both modulation schemes?

You can't do this unless you know more detail on the frequency modulator, like its modulation index, for example or the frequency deviation. For the amplitude modulator, it is easy. Bandwidth is twice the signal frequency so in this case the bandwidth is 178kHz for AM.


In what ways can a transistor amplifier modulator be modulated?

If I remember correctly, the definition of "modulation" is a "change in amplitude or frequency".


What is difference between modulator and demodulator?

Modulation is used when information is available in analog form that varies the frequency and/or amplitude of a lower frequency wave, depending on the information it carries. The role of modulation is to place this information onto a carrier frequency that can be transmitted more readily and with least loss of information. There are three fundamental types of modulation - frequency modulation, amplitude modulation and phase modulation. In each of these, a carrier frequency is modulated by a lower frequency, to form a modulated carrier wave. A modulator modulates the carrier frequency, while a demodulator detects the modulation on the carrier wave and recovers the original lower frequency waveform at the destination. For many years the modulated carrier wave was converted to a radio signal. Now it is often an electrical signal which is sent down a teleohone line; the information is usually a set of pulses going between computers. When computers are connected to each other in a two-way conversation, the MOdulator and DEModulator are combined into a single device called a MODEM.


Which modulator can perform amplitude frequency and phase modulation?

An analog or digital modulator can perform amplitude, frequency, and phase modulation. These modulators are commonly used in communication systems to modulate a carrier signal in order to transmit information.


What is the usage of frequency modulation?

It is a device or electronic circuit that changes the frequency of an oscillator according to the amplitude of modulating signal. For instance, if the modulation is linear, the modulator changes the frequency proportional to the amplitude of the modulating voltage.


What is a demodulator?

The process of separating the original information or SIGNAL from the MODULATED CARRIER. In the case of AMPLITUDE or FREQUENCY MODULATION it involves a device, called a demodulator or detector, which produces a signal corresponding to the instantaneous changes in amplitude or frequency, respectively. This signal corresponds to the original modulating signal


What is the relation between carrier frequency and modulating signal?

If the modulating system is AM (Amplitude Modulation) then the amplitude of the carrier wave changes with the amplitude of the modulation. On a specrum analyser that shows up as frequency sidebands. If the frequency of the carrier waves depends on the amplitude of the modulating signal that is called FM (frequency modulation). On a spectrum analyser that shows up as sidebands also.


What is collector modulation?

Collector modulation is the amplitude modulation in which modulator varies the collector voltage of a transistor.


What is a modulated carrier waves?

A modulated carrier wave is the output of a modulator that includes the information of the signal that is applied to the carrier.When a signal typically a piece of music in the range of say 30Hz to 30KHz is applied to an AM modulator (not sure about FM or PM) with a carrier of say 3MHz the output consists of 4 packetsUpper Sideband (Carrier + Signal) 3.000003MHz to 3.03MhzLower Sideband (Carrier - Signal) .297MHz to .299997MHzCarrier 3MHzSignal 30Hz to 30KHzEither sideband in the case of Single Side Band (SSB) or Both (.297MHz to 3.03Mhz) in the case of Double Side Band (DSB) could be referred to as modulated carrier waves


Discussion about amplitude demodulator?

A modulator modulates the carrier frequency, while a demodulator detects the modulation on the carrier wave and recovers the original lower frequency waveform at the destination. For many years the modulated carrier wave was converted to a radio signal. Now it is often an electrical signal which is sent down a teleohone line; the information is usually a set of pulses going between computers. When computers are connected to each other in a two-way conversation, the MOdulator and DEModulator are combined into a single device called a MODEM.


Is Modem refers to Modulator and Demodulator?

MODEM modulation & demodulation .......


What is the modulation of frequency?

It is a device or electronic circuit that changes the frequency of an oscillator according to the amplitude of modulating signal. For instance, if the modulation is linear, the modulator changes the frequency proportional to the amplitude of the modulating voltage.