Arc welding has many preferable qualities in welding such as: Faster weld speeds (obvious economics). Less distortion from thermal expansion/contraction. Addition of alloying elements in the electrode flux or coating. Higher weld qualities since scavenging agents can be added that will combine a "float out" impurities. The gas shield from the flux or additional externally added inert gas shields the molten weld pool from harmful atmospheric gases such as oxygen (oxidising) and hydrogen (embrittlement). A better selection of weldable materials (extremely difficult to "torch" weld aluminum due to oxide formation and high thermal conductivity is one example magnesium will start to burn and is hard to put out would be another example).
smaw welding is sheilded metal arc welding
Gas Tungsten Arc Welding Gas Metal Arc Welding Flux Cored Arc Welding
SAW welding is a type of arc welding while ERW welding is spot or seam welding. SAW stand for submerged arc welding while ERW stands for electric resistance welding.
There are far more than 5 types or processes of welding. Currently the American Welding Society (AWS) states that there are more than 80 different welding and joining processes. However, some of the common welding processes include shielded metal arc welding (SMAW), gas metal arc welding (GMAW), gas tungsten arc welding (GTAW), flux cored arc welding (FCAW), and oxyfuel gas welding (OFW).
shielded metal arc welding does not required any shielding gas
The 'arc' in arc welding is not an acronym but in turn is a reference to the electric arc that is being generated during the welding process.
If you are asking for the correct nomenclature it is Shielded Metal Arc Welding.
Almost all welding today is done with electricity (Arc Welding) even on cast iron. SMAW, GTAW, GMAW etc. --AW means Arc Welding.
Yes, arc welding does create ozone. It is because the temperatures created during arc welding convert the nearby oxygen to ozone.
smaw welding is sheilded metal arc welding
If you are asking for the correct nomenclature it is Shielded Metal Arc Welding.
Gas Tungsten Arc Welding Gas Metal Arc Welding Flux Cored Arc Welding
ARC welding uses large amounts of electricity to melt the metal, not a hot flame. So no, LPG cannot be used for ARC welding.
Welding Electrorodes or Welding Rods are used in arc welding. Arc welding is a special type of welding which uses a welding power supply to create an electric arc between the base material (e.g. steel) and the electrode. The Welding Ectrorodes can be used for all weldable aluminum and mild steel.
The American Welding Society abbreviations for the arc welding processes that melt a tubular electrode with alloys deoxidizers and slag formers in their cores are FCAW (Flux-Cored Arc Welding) and metal-cored arc welding (MC).
Shielded Metal Arc Welding, known colloquially as "stick".
SAW welding is a type of arc welding while ERW welding is spot or seam welding. SAW stand for submerged arc welding while ERW stands for electric resistance welding.