Yes. Grade 8.8 refers to a standard (ISO 898-1) which defines the tensile strength (around 55 tons/square inch).
quenching is rapid cooling of steel to be heat treated, there are basically four types of quenching: 1- by water. 2- by oil. 3- by air. 4- by furnace. water oil air furnace tensile stress 175*104 112*104 88*104 52*104 (N/mm2)
The array has eight elements indexed 0 to 7. The middle element will be found at index (0+7)/2=3. Element 3 has the value 26, which is smaller than 88, so 88 must reside in the array starting at index 4 ending at index 7. The array has four elements indexed 4 to 7. The middle element can be found at index (4+7)/2=5. Element 5 has the value 56, which is smaller than 88, so 88 must reside in the array starting at index 6 ending at index 7. The array has two elements indexed 6 to 7. The middle element can be found at index (6+7)/2=6. Element 6 has the value 88. Thus 88 was found at index 6.
The only replacement for your 2.3 is another 2.3 or a 2.6 out of a '88-91 Trooper, '89-94 Amigo, '88-95 Pup, or '91-96 Rodeo. information has been edited because the original poster has no clue what they are talking about.
Well, darling, to solve 883 divided by 8, you simply do the math. 8 goes into 88 eleven times, so you put 11 above the 8. Subtract 88 from 88 to get 0, bring down the 3, and 8 goes into 33 four times, giving you a total of 110. Voila, the answer is 110 with a remainder of 3.
short tube on the end of a hose
A score of 88% is usually a B+.
88%
It's an fantastic grade. I say 85-100 is a good grade
I think it is a B+.
You would divide 46 by 52 and then multiple by 100 to find the percent. The grade would be an 88 if all the questions are worth the same amount.
140/88 is that considered high
88%, or a B+
80% or B-
88% or B+
88% or B+
88% or B+
73 and 1/3 percent