Bear the load. Bare the load would be to uncover the load...
25 kV.A for a permanent load; more if the load is variable.
It all depends on the dimensions of the steel beam
Answer for UK, Europe and countries running a 50 Hz supply service.Common single phase meters for a 240 v system can take a 60 amp or sometimes a 100 amp load for domestic use.
Bare cable is simply a conductor without a coating, sheating, or covering. It is just bare wire.
Steel uses I shape that bear more shear load, that is why it is typically used for high buildings, while concrete is used for small building due to the low shear force it can bear. RCC will need more area as the number of floors get higher, the steel structure don't.
It is of course bear not bare
Bear
You can bear a load.
The expression is not "Come to bare" but is actually "Come to bear." In this sense, "bear" is referring to a load or burden; for example, when a wall in a house bears the weight of an upper floor or a roof it is said to be a "load bearing wall." If something "comes to bear," the force or effect of it starts to be felt.
- A bare bear can bear very little because it's bare.
No, "bear" and "bare" are not homophones. "Bear" refers to the animal, while "bare" means uncovered or naked.
"Bear" has at least two meanings. It can refer to an animal like a polar bear or black bear, or it can mean to carry or put up with, usually in the sense of having difficulty (It was difficult for the firefighter to bear the thought of so much destruction.) Bare means to uncover or be uncovered.
Bare means naked. Bear means to support.
bare is like the carpet is bare and bear is an animal
Another homophone for "bare" is "bear."
You would say "bear pain." To "bear" something means to put up with it, to endure it. To "bare" something means to make it naked, unclothed.
It's to "bear fruit." yeah it is the right answer