0
What else can I help you with?
What does an fuse do in an circuit?
A fuse protects the (expensive) circuit for too high currents. When the current becomes too high the (cheap) fuse melts and the current is stopped, preferably before damage has been done to the circuit.
What happens when the voltage standing wave ratio is too high?
If the vswr (Voltage Standing Wave Ration) is high than call drop chance increase.
Explain why diodes melt?
Diodes, like many other electronic/electrical components, will melt if the temperature is high enough. This would occur if the power dissipation were too high because the current was too high.
What happens if transformer wattage is much less than load wattage?
If the load current is too high, the power lost in the transformer windings will be too high and it will overheat. If the voltage is excessive, the power lost in eddy currents in the magnetic core will be too high and it will overheat.
What is the function of a summation current transformer?
Current transformers are used to measure electric currents. When current in a circuit is too high to directly apply to measuring instruments, a current transformer produces a reduced current accurately proportional to the current in the circuit, which can be conveniently connected to measuring and recording instruments.
The electrical current breaks when?
the current becomes too high
The sample is not completely thermally decomposed in the procedure will the mole ratio of CaO To CO2 be too high or too low. explain?
If the sample is not completely thermally decomposed, the mole ratio of CaO to CO2 will be too high. This is because there will be unreacted CaCO3 remaining in the sample, leading to an overestimation of the amount of CaO present and, consequently, an inflated mole ratio.
Why are some channels blurry?
if you mean fuzzy as in not a very high resolution its because you have too high of a pixel ratio for cable (meaning if you have 1080p or anywhere near that ratio then it is too much for cable), i would advise upgrading to charter high definition though if you mean that its static i cannot explain that sorry.
What does an fuse do in an circuit?
A fuse protects the (expensive) circuit for too high currents. When the current becomes too high the (cheap) fuse melts and the current is stopped, preferably before damage has been done to the circuit.
What is damaged resistor?
A damaged resistor is one that it fried by current that is too high
What happens to a switch that automatically opens the current if it is too high?
Circuit Breaker.
How to make THE WORST bacon EVER?
cook it at too high a heat
Is quick ratio a better measure of the firms liquidity than current ratio?
Yes because a quick ratio doesn't include inventory which must be sold before it can be used to pay for the companies current obligations. Of course you have to collect the cash in A/R before it can be used to pay for current obligations too but AR should be able to be converted to Cash much quicker than Inventory. A Cash Ratios, which doesn't include AR or Inventory is an even better measure of a firms liquidity than both the quick and current ratio.
Why ohm's law is applicable for steady current?
It's an immutable law of physics! It applies to a.c. too but only if the circuit is purely resistive.AnswerOhm's Law is not a universal law, and only applies to a limited range of conductors or loads, called 'linear' or 'ohmic' conductors or loads. Basically, it only applies when the ratio of voltage to current is constant for variations in applied voltage. If this ratio changes for variations in voltage, then the conductor (e.g. tungsten) or load (e.g. diode) does NOT obey Ohm's Law and is termed 'non-linear' or 'non-ohmic'.The ratio of voltage to current is called 'resistance', and the ratio will ALWAYS tell you what the resistance happens to be for that particular ratio (if the ratio varies with voltage, then so too does the resistance), whether the conductor/device obeys Ohm's Law or not!So Ohm's Law really has nothing to do with a circuit having a 'steady current'; it's all to do with whether or not the ratio of the circuit's voltage to current is constant for variations in voltage. Nothing more!
What happens when the voltage standing wave ratio is too high?
If the vswr (Voltage Standing Wave Ration) is high than call drop chance increase.
Is the utilization of loans too high in the current financial market?
The utilization of loans in the current financial market is high, which can lead to concerns about excessive debt levels and potential risks to the economy.
When the potential is high the current passing through a conductor it is also high true or false?
I think you mean when the 'potential difference' is high, is the current also high? The answer is that it depends on the impedance (a.c.) or resistance (d.c.) of the circuit. If this remains constant, then raising the potential difference will cause the current to increase too.
