Yes, several alternatives can substitute for the L293D motor driver IC, depending on your specific requirements. Popular substitutes include the L298N, which can drive larger motors, or the SN754410, which is a similar dual H-bridge driver. Additionally, you can use a combination of MOSFETs or other motor driver ICs like the DRV8833 or TB6612FNG, which offer different features and efficiencies. Always consider the voltage and current ratings of the substitute to ensure compatibility with your application.
it can be done using L293d ic , the ic can control two motors. refer the data sheet for the connections and circuit. L293d also has inbuilt H-bridge.
ic 8284
in ic 7805 their is two capacitor is used one of them is used for the settling/transient time and another is used to provide inductive effect....
The ICL 8063 is a voltage regulator, and suitable substitutes include the LM317 or the LM7805, depending on the specific application requirements such as output voltage and current capacity. When selecting a substitute, ensure that the pin configuration and thermal performance meet your needs. Always consult the datasheets for the specific ICs to verify compatibility and performance characteristics.
L293D is having 20 pin IC and also 16 pin IC. description of 20 pin is: 1-enable 1 2- input 1 3- output 1 4,5,6,7,14,15,16,17- ground 8- output 2 9- input 2 10,20-vs 11-enable 2 12- input 3 13-output 3 18-output 4 19-input 4 description for 18 pin: 1-enable 1 2- input 1 3- output 1 4,5,12,13- ground 6-output 2 7- input 2 8,18-vs 9-enable 2 10-input 3 11-output 3 14-output 4 15-input 4
What enable1&enable2 in pin l293d
it can be done using L293d ic , the ic can control two motors. refer the data sheet for the connections and circuit. L293d also has inbuilt H-bridge.
basic operation of mobile controlled lies with the functioning of DTMF and L293D driver ic. one mobile phone is used to send DTMF tones to Rx mobile phone and DTMF decoder ic is used to decode the dtmf tones and it sends information to to micro controller which produces response according to program and gives control to l293d driver ic.
For an IC chip
ic 74180 is used for parity genrator
ic 8284
we are using just one ic in a microprocessor
Atmega is IC produced by ATMELPIC is IC produced by MICROCHIP TECHNOLOGIESboth these IC names are used as a prefix for their microcontrollers
it is an ic used for generating pulses.its circuit has resembalance with the circuit of flip-
fets are used in linier ic's to 1)to provide large resistences 2)increase input resistence
The Microprocessor.
CADA112605