answersLogoWhite

0

The 'type' of power is determined by the load. If the load is resistive (e.g. a lamp) then the rate at which it consumes energy is termed 'true power', expressed in watts.

You seem to be under the impression that reactive power is 'pushed out' into a load. This is quite false; the loaddetermines the power.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Engineering

What is the unit of measure for reactive power?

Volt Amps [volts times amps] is used for reactive and apparent power. Watts (dimensionally the same as volt amps) is used to indicate real power.AnswerReactive power is measured in reactive volt amperes (var).


Why reactive power is named as reactive?

Actually reactive power is a power which flows in between load to source which is a reactive action of the power given from source to load.the given power to load will not be utilised fully.some power will be oscillating from load to source.this is called reactive power.


What is the relationship of the reactive volt-amperes to the total volt-amperes in a unity-power factor circuit?

If you have unity power factor, p.f.=1, then the real power P must equal the total power S. Therefore, there is no reactive power being used, Q=0.Alternative AnswerApparent power is the phasor (vector) sum of true power and reactive power: (apparent power)2 = (true power)2 x (reactive power)2


What are advantages of reactive power?

Real power is power that is used to do work. This is the power a light bulb uses to glow. Reactive power is power that is stored in one part of the AC voltage wave, and released in another. This causes the power to appear as a phase shift, and is generally caused by inductive or capactive loads. With regard to the power system, you can also get reactive power flowing due to unequal source voltages. Under these conditions, the apparent impedance of one source to the other will appear reactive/inductive, resulting in reactive power flow.


What happens to reactive power in a circuit that has both inductance and capacitance?

Inductors are considered to be a load for reactive power, meaning that they will draw reactive power from the system. Capacitors are considered to be sourced of reactive power, they feed reactive power into the system. If you have a circuit that is at unity (balanced with inductors and capacitors) no reactive power will be drawn from the source. You will have unity power factor. If your circuit is more inductive than capacitive it will be drawing reactive power from the source. The opposite is also true for capacitors.

Related Questions

What is the electrical power of light bulbs what is it measued in?

Electrical power of a bulb is real power used by the bulb. It is measured in Watts. In general, the higher the bulb watt rating, the more lumens it will produce. This is not always the case, since some bulbs are more efficient than others at turning electrical energy into light (ie some bulbs produce more heat, an unwanted byproduct, than others). Real electrical power is always measured in watts. Total power (real and reactive) is measured in volt amperes, which is a vector summation of real power plus reactive power. Power times a time it is used is measured in Joules, or watt seconds.


Is mvar can used to measure mva?

No, mvar (megavolt-ampere reactive) is a unit of apparent power while MVA (megavolt-ampere) is a unit of real power. Mvar is used to measure reactive power, while MVA is used to measure total power (both real and reactive).


Is argon used in a light bulb?

yes argon is used for light bulb and it is not reactive


What is the unit of measure for reactive power?

Volt Amps [volts times amps] is used for reactive and apparent power. Watts (dimensionally the same as volt amps) is used to indicate real power.AnswerReactive power is measured in reactive volt amperes (var).


How reactive power is used?

Reactive power (VARS) is required to maintain the voltage to deliver active power (watts) through transmission lines.Motor loads and other loads require reactive power to convert the flow of electrons into useful work.When there is not enough reactive power, the voltage sags down and it is not possible to push the power demanded by loads through the lines.


Why reactive power is named as reactive?

Actually reactive power is a power which flows in between load to source which is a reactive action of the power given from source to load.the given power to load will not be utilised fully.some power will be oscillating from load to source.this is called reactive power.


What is reactive volt amps?

volt ampere reactive is the unit of reactive power.It is the power which does no useful work but is required to assist in performing work,such as setting up magnetic fields in motors and transformers.It is also called as imaginary power.It occurs in purely reactive circuit i.e. purely inductive or capacitive.The inductance absorbs the reactive power and capacitance injects the reactive power.In inductance,reactive power is utilised to develop the flux while in the capacitance,the reactive power's function is to store the charge.


What is the relationship of the reactive volt-amperes to the total volt-amperes in a unity-power factor circuit?

If you have unity power factor, p.f.=1, then the real power P must equal the total power S. Therefore, there is no reactive power being used, Q=0.Alternative AnswerApparent power is the phasor (vector) sum of true power and reactive power: (apparent power)2 = (true power)2 x (reactive power)2


Does a light bulb emit carbons when used?

the electricity used to power the light bulb emit carbon dioxide


What is kilo volt amps reactive?

Kilo Volt Amps Reactive (kVAR) is a unit of measurement used to quantify reactive power in an electrical system. Reactive power is the power that oscillates between the source and load, primarily in inductive or capacitive components, and does not perform any useful work. It is essential for maintaining voltage levels in power systems and is critical for the efficient operation of electrical equipment. kVAR is often used in power factor correction and in the analysis of AC power systems.


What is real power in electricity?

real power is to do do work and it is supplied to the load ,where as the reactive power is used for magnetising and the apparent power is the total power


What are advantages of reactive power?

Real power is power that is used to do work. This is the power a light bulb uses to glow. Reactive power is power that is stored in one part of the AC voltage wave, and released in another. This causes the power to appear as a phase shift, and is generally caused by inductive or capactive loads. With regard to the power system, you can also get reactive power flowing due to unequal source voltages. Under these conditions, the apparent impedance of one source to the other will appear reactive/inductive, resulting in reactive power flow.