answersLogoWhite

0

Yes. If the sump pump is used as a sewage lift station, objects going into the toilet (especially forign objects) can cause the pump to clogg. These pumps are usually referred to as sewage ejector pumps. If the sump pump is only used for stormwater runoff, and foundation drains, then no, the toilet is a separate system and would not affect it. These are referred to as sump pumps. Except in unusual circumstances, such as when a toilet overflows, and drains into the basement floor drains for instance, these are totally separate.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Engineering

Sump Pump Repair?

form_title=Sump Pump Repair form_header=11513 How would you best describe the problem?*= () "Bad odors () Motor sounds, but not discharging water () No power to sump pump unit () Water in sump overflowing () Needs general servicing () Other"


What is the difference between a sump pump and a utility pump?

A sump pump is submerged in a pit. It keeps house from flooding. A utiliity pump is used to pump water out of already flooded house, boat, pool, tank, etc....


Drain gurgles when the sump pump runs?

That sounds like you have a good sump pump and it's really trying hard to get rid of excess water.


How To Install A Sump Pump In Your Home’s Crawl Space?

When you have a crawl space under your home, you have the possibility of having flooding or water build up. If the level of water is allowed to build up too much you can find that your home can sustain costly damage and repair issues. Installing a sump pump in your crawl space can save you from this headache. Here is a guide to help you set up a sump pump for protection. Step 1. Turn off power to the sump pump at the main power source. This will help prevent electrical shock. Step 2. A solid foundation needs to be constructed for the sump pump to rest on. This foundation is best constructed of cinder bocks or a solid piece of wood that is a little larger than the size of the pump. The foundation also needs to be level for the best results. Step 3. Drill a small hole in the discharge pipe. This will help the air flow easier through the pipe for better pressure. Install the discharge pipe from the sump pump to the area where you want to drain the excess water to. Step 4. If water begins to flow back into the sump pump, you will need to install a check flow valve or similar device. Step 5. You will need to attach the power cord for the sump pump to the discharge pipe. This cord must be secure. Step 6. Plug the power cord for the sump pump into the electricity source that you plan on using. Turn the power back on at the main power source for the sump pump to operate. Step 7. It is necessary to test the sump pump for positive operation results prior to using it. To test your sump pump fill the sump pump with water. Never test or operate your sump pump without water being present. Step 8. Add water or refill the pump until there is enough water to reach the level where the sump pump will turn on. Step 9. If you want to install a cover for your sump pump, you can do this now. These covers will help to eliminate dirt and debris from building up in your sump pump and will help to provide odor control from stagnant water.


What is thermo overload on a sump pump?

It is an over heat protection to prevent pump windings from buring out

Related Questions

Are Toilets are the most likely plumbing fixture to cause sump pump clogging?

A fixture carrier is a device that keeps the toilet off the floor and used on basins especially commercial and handicapped applications. These carriers support the weight of the fixture and the weight of people who use a wall hung basin as a support. SEE JR SMITH as they make out standing carriers. http://www.jrsmith.com/


When my sump pump stopped working why did the water pour out of the upstairs toilet and not the basement toiet?

because the upstairs toilet drain was clogged up.


What are the benefits of installing a sump pump toilet in a basement bathroom?

A sump pump toilet in a basement bathroom can help prevent flooding by efficiently removing wastewater. It can also save space and eliminate the need for traditional plumbing systems, making it a practical and convenient option for basement bathrooms.


What is the purpose of a sump pump for a toilet and how does it function in the overall plumbing system?

A sump pump for a toilet is used to pump waste water from a basement or below-grade bathroom up to the main sewer line. It functions by collecting the waste water in a pit or basin, then activating to pump the water out through a discharge pipe. This helps prevent flooding and ensures proper drainage in the plumbing system.


What is Sump Pump Repair and why do I need it?

You would need a sump pump repair if the sump pump in your basement is not pumping out water. The purpose of a sump pump is to drain excess water that is part of your waterproofing system.


Why is my basement flooded if my sump pump is not working?

If your sump pump is not working, it may be unable to pump out water that is collecting in your basement, leading to flooding. Sump pumps are designed to remove excess water from the area around your home's foundation, so if it is not functioning properly, water can accumulate and cause flooding in your basement.


What do you look for in a back up sump pump?

Power failures are the most likely cause of sump pump failure, but other reasons, such as a faulty switch, incorrect installation or even the unlikely event of a product failure, can trigger sump pump back-up. With routine maintenance on your sump pump, many failures can be avoided.If your sump pump backs up, West Michigan Septic Sewer & Drain Service, the knowledgeable, professional experts for your sump pump back-up repair, will promptly respond to your call.


What is the purpose of a sump pump vent and how does it contribute to the overall functionality of a sump pump system?

The purpose of a sump pump vent is to release air pressure from the sump pump system, allowing water to flow freely and preventing airlocks. This helps the sump pump operate efficiently by ensuring proper drainage and preventing clogs or malfunctions.


Where does a sump pump drain water from?

A sump pump drains water from a sump pit or basin located in the lowest part of a basement or crawlspace.


What is the process for replacing a sump pump battery?

To replace a sump pump battery, first, disconnect the old battery and remove it from the sump pump. Then, install the new battery by connecting it to the pump following the manufacturer's instructions. Finally, test the sump pump to ensure the new battery is working properly.


What are the best options for a sump pump cover square to protect your sump pump system?

The best options for a sump pump cover square to protect your sump pump system include durable plastic covers, metal covers, and custom-fit covers. These covers help prevent debris from entering the sump pump system and ensure proper functioning.


What is the purpose of a sump pump bucket and how does it contribute to the functionality of a sump pump system?

The purpose of a sump pump bucket is to collect water that enters the sump pump system. It helps prevent flooding by holding the water until the pump can remove it. The bucket also helps keep the pump from running too frequently, which can extend its lifespan.