You could, if the extract fan is downstream of the junction of the two vent pipes, and if it has sufficient capacity. But in general, this would not be considered a good idea, as the possibility of 'cross contamination' may be present.
If the fan is upstream of the pipe junction, then it is a bad idea.
You need at least a 3 in. pipe -- shower is 2 in. pipe
2"
You Can but typically the pipe for the shower head that is coming out of the wall is just a short piece of pipe that you should be able to remove easily enough by unscrewing it. Then you can just replace that piece with a new one. == Answer== Do the same as above but make sure your shower arm is not floppy, if it is you could tear up the riser coming to the arm. Be very carefull.
Absolutely NOT you 2" minimum
If you are talking about a roof water drain pipe to sewer it is illegal. If you are talking about a sink drain pipe well that is where they all connect to so yea.
You could, if the extract fan is downstream of the junction of the two vent pipes, and if it has sufficient capacity. But in general, this would not be considered a good idea, as the possibility of 'cross contamination' may be present. If the fan is upstream of the pipe junction, then it is a bad idea.
Yes.
Shower pipe is gray
To install a shower head in the wall, first locate the water supply pipes behind the wall. Turn off the water supply to the shower. Use a drill to create a hole in the wall for the shower head pipe. Insert the shower head pipe into the wall and secure it with a mounting bracket. Connect the shower head to the pipe using plumber's tape to prevent leaks. Turn the water supply back on and test the shower head for proper function.
To install a shower pipe in the wall, you will need to first locate the studs in the wall where you want to install the pipe. Use a stud finder to find the studs and mark their locations. Then, use a drill to create a hole in the wall where you want the pipe to go. Insert the pipe into the hole and secure it in place using pipe fittings and a wrench. Finally, connect the pipe to the water supply and test for leaks before sealing up the wall.
You need at least a 3 in. pipe -- shower is 2 in. pipe
If your shower pipe is leaking, it may need immediate repair.
A garbage disposal unit connects to the drain pipe in a kitchen sink through a mounting assembly that is attached to the underside of the sink. The disposal unit is then connected to the drain pipe using a discharge tube, which allows food waste to flow into the plumbing system for disposal.
A shower drain plumbing diagram typically includes the shower drain, trap, waste pipe, and vent pipe.
To install a range hood vent pipe in your kitchen, first determine the best location for the vent pipe to exit the house. Next, measure and cut a hole in the wall or ceiling for the vent pipe. Install the vent pipe securely, ensuring it is properly sealed to prevent leaks. Finally, connect the vent pipe to the range hood and secure it in place. It is recommended to consult a professional if you are unsure about the installation process.
To connect a kitchen sink drain, you will need to install the P-trap and tailpiece. First, attach the tailpiece to the sink drain and then connect the P-trap to the tailpiece. Finally, connect the other end of the P-trap to the drain pipe in the wall. Make sure all connections are secure and use plumber's tape or sealant to prevent leaks.
Some options for a shower head pipe extension to increase the height of your shower head include purchasing a longer shower arm, using a shower arm extension, or installing a ceiling-mounted shower arm.