1 bar = 14.5 psi. If you mean gauge pressure, ie pressure above atmospheric, 6 bar would be 87 psig
Initially, a minimum of 5.2 bar is needed to convert air to liquid under pressure. This pressure is for the initial process. For the final process, less than 1.7 bar is needed.
To convert 40 psi (pounds per square inch) of water to air pressure, you can use the fact that 1 psi is equal to approximately 0.06895 bar. Therefore, 40 psi of water is equivalent to about 2.76 bar or approximately 276 kPa in terms of air pressure. However, since water and air behave differently under pressure, the direct comparison is limited to understanding the pressure value rather than a functional equivalence.
PN 16 valve can withstand 5 bar pressure. I have experienced that at 7 bar it cannot hold the pressure and starts to leak.
30-40 bar peak pressure
1 bar is 14.5 PSI so it would be 11.6 PSI
Pressure is the physical quantity measured in bar.
Believe it or not, we can die from too little oxygen AND too much oxygen. This concept involves partial pressures. If we first consider using standard air (i.e. 20% Oxygen and 80% Nitrogen): (1 bar = 1 kilogram of pressure per square centimetre) At the surface - Total Pressure of air = 1 bar - Pressure of Oxygen = 0.2 bar - Pressure of Nitrogen = 0.8 bar At 10m - Total Pressure of air = 2 bar - Pressure of Oxygen = 0.4 bar - Pressure of Nitrogen = 1.6 bar At 20m - Total Pressure of air = 3 bar - Pressure of Oxygen = 0.6 bar - Pressure of Nitrogen = 2.4 bar At 30m - Total Pressure of air = 4 bar - Pressure of Oxygen = 0.8 bar - Pressure of Nitrogen = 3.2 bar At 40m - Total Pressure of air = 5 bar - Pressure of Oxygen = 1.0 bar - Pressure of Nitrogen = 4.0 bar At 50m - Total Pressure of air = 6 bar - Pressure of Oxygen = 1.2 bar - Pressure of Nitrogen = 4.8 bar At 60m - Total Pressure of air = 7 bar - Pressure of Oxygen = 1.4 bar - Pressure of Nitrogen = 5.6 bar At 70m - Total Pressure of air = 8 bar - Pressure of Oxygen = 1.6 bar - Pressure of Nitrogen = 6.4 bar It is at the partial pressure of 1.6 bar (which occurs at 70m where oxygen becomes toxic. That is why most dive organisations recommend 50m as a maximum for recreational diving. However, if pure oxygen is used: At surface - Pressure of Oxygen = 1 bar At 10m - Pressure of oxygen = 2 bar The oxygen has already become toxic! Hope that answers your question. The concept is called "partial pressures" and "oxygen toxicity" if you want to research more on a search engine.
At sea level, the average air pressure is about 1 bar. As you increase in altitude, the air pressure decreases. On average, the air pressure decreases by about 12% for every 1000 meters of elevation gain. Therefore, at an altitude of 1200 meters, the air pressure would be approximately 0.88 bar.
6 bar pressure is relatively strong, equivalent to about 87 psi (pounds per square inch) or 600 kPa (kilopascals). This level of pressure is commonly found in various applications such as in car tires, air compressors, and some hydraulic systems.
Initially, a minimum of 5.2 bar is needed to convert air to liquid under pressure. This pressure is for the initial process. For the final process, less than 1.7 bar is needed.
500 mm water column is equivalent to approximately 0.05 bar pressure.
Pneumatic is air pressure in a container. Like a Tire. Bar is is a pressure measuring system, usually meaning multiples of atmospheric air pressure at sea level. The Bar system can be used to state the pressure at the centre of the sun so has no realistic limit. Saying Pneumatic bar is just confusing.
"Bar" is approximately the pressure of earth's atmosphere at sea level. Multiple bars are multiple normal air pressures. Three bar is three times the air pressure at sea level, etc. Technically a bar is defined as 100 kPa, which is very slightly less than standard atmospheric pressure (1 atmosphere = 1.01325 bar).
Air pressure is measured in bar.
10 bar
Barometer.
Type your answer here... i have a tank with 5.18m^3 volume . iwant to know how many liters of air with 8 bar in there?