NO. -You buy special drill tipped screws for it at the same places you get steel studs.
Vapour barrier is directly onto studs.
between the studs, drywall, and roof there are several thousand nails in any house
Epoxy is the best one.
Use 100% silicone adhesive like PL700.
Shear studs are attached to steel wide-flange beams using a process called stud welding. First, the beam surface is cleaned to remove any contaminants. The shear studs are then positioned on the beam, and a stud welding machine is used to heat the end of the stud with an electric arc, creating a molten pool. Once the stud is pressed against the beam, it bonds as it cools, creating a strong connection.
Vapour barrier is directly onto studs.
The best type of glue for drywall installation is drywall adhesive, also known as drywall compound or joint compound.
The recommended type of screws to use for attaching drywall to metal studs are self-drilling drywall screws.
Coarse drywall screws have deeper threads and are used for attaching drywall to wood studs, while fine drywall screws have finer threads and are used for attaching drywall to metal studs.
The standard spacing for drywall studs in a residential construction project is typically 16 inches on center.
There is no drywall glue. -If you are referring to mud (drywall compound), you scrape the lumps off at the end of each day and then wash your clothes. It always comes off.
To hang on drywall securely and safely, use anchors or screws designed for drywall. Locate studs for heavier items. Use a stud finder to locate studs, then use screws or nails to hang items securely. Avoid hanging heavy items on just drywall alone.
That is the thickness of the studs, -the inside of the wall.
Wood screws are not recommended for drywall installation. It is best to use drywall screws specifically designed for this purpose, as they have a finer thread and are better suited for securing drywall to studs.
American Builder - 2004 Liberty Way Studs and Drywall 4-73 was released on: USA: 15 October 2007
American Builder - 2004 Island Pond Drywall Studs 3-21 was released on: USA: 25 May 2006
I have done this a few times. If the steel studs are in a good position, I use 1" drill tipped screws into the stud, OR I put 6 E-Z Ancor's into the wallboard next to the stud. I have hung up to 120 pounds on 4 E-Z Ancor's and never had one come out. -Available in Rona and Home Depot.