answersLogoWhite

0

No. First, the water will never be hotter than 212 degrees F (or 100 degrees Celsius). Above that, it becomes steam. Secondly, much of the heat output goes up the chimney.

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Engineering

What is the measure of the output achieved divided by input required?

Productivity is the measure of the output achieved divided by input required.


Why might the unloaded output voltage of a transformer be higher than its rms of 12.6v?

Because the windings of transformers have resistance, the primary and secondary currents will cause voltage drops. To compensate for the drops, the transformer may have been designed to have a higher than specified output voltage when there is little or no output current. The no load output voltage typically is only slightly greater than the specified voltage. Before measuring the output voltage, measure the input (line) voltage. If it is not as specified for the transformer, calculate its effect on the output.


How lm35 converts its temperature into analog output?

The LM35 temperature sensor measures temperature by generating a voltage output that is linearly proportional to the Celsius temperature. Specifically, it produces an output of 10 mV per degree Celsius. As the temperature rises or falls, the sensor changes its output voltage accordingly, allowing for easy analog-to-digital conversion or direct interfacing with microcontrollers and other circuitry. This makes it simple to read and process temperature data in various applications.


Can measure Automatic Voltage Regulator voltage of a generator by dc meter?

No, you cannot accurately measure the output voltage of an Automatic Voltage Regulator (AVR) using a DC meter, as the AVR typically regulates AC voltage for the generator. A DC meter is designed for measuring direct current voltage, while the voltage output from a generator is usually alternating current (AC). To measure the AC voltage effectively, you would need an AC voltmeter or a multimeter set to the AC voltage setting.


How can you test the mAh output of a power source?

You measure it with a clamp-on ammeter.

Related Questions

What is digital temperature sensor?

Digital temperature sensors are usually silicon-based temperature- sensing ICs that output precise digital representations of the temperatures they are measuring.


What is the difference between kelvin and lumens in terms of measuring light output?

Kelvin measures the color temperature of light, indicating whether it is warm or cool. Lumens measure the brightness of light, indicating how much light is emitted.


Is it possible to measure capacitance using only one 555 timer?

yes, it is possible to measure capacitance using only one 555 timer for it's monostable operation. When the output is high time is given by the equation t=1.1RC. From the output pulse measuring t(high) and then by measuring R we can calculate the capacitance.


What is Cold junction compensation?

Cold junction compensation (CJC) is a technique used in thermocouple measurements to account for the temperature at the connection point where the thermocouple wires connect to the measurement system. Since thermocouples generate a voltage based on the temperature difference between the measuring junction and the reference junction, any variation in the reference junction's temperature can lead to inaccurate readings. CJC typically involves using a temperature sensor to measure the reference junction's temperature and adjusting the thermocouple's output accordingly, ensuring accurate temperature readings at the measuring point.


What dmv setting is used to measure power supply output voltage?

Dc V if you are measuring direct current. Ac V setting if measuring AC voltage. Recommend using a meter that's AUTO Ranging.


What are the Difficulties in measuring of national income?

identify output and output may be final or intermediate


What tools are used for measuring hydroelectric energy?

Hydroelectric energy is typically measured using instruments like flow meters to measure the volume of water flowing through the turbine, and power meters to measure the electrical output. Other tools such as pressure gauges and temperature sensors may also be used to monitor the performance and efficiency of the hydroelectric system.


What are the properties that a device must have in order to measure temperature?

A device that measures temperature must have a temperature sensor that responds to changes in temperature, a way to convert the sensor's response into a numerical value, and a display or output to show the numerical temperature value. Additionally, the device should have the ability to calibrate and accurately measure a range of temperatures.


Why dynamo meter not use for measure power factor?

Because a dynamometer is used to measure the mechanical power output of a motor or engine. There are ways of measuring the power factor directly, for example use a plug-in power and energy monitor.


What unit of measure does a graduate measure?

it is use to measure output


What is the unit of measure for work output?

The 'ERG' is the standard unit for work or mechanical energy.


How and why do you monitor a persons urine output?

The urine output is measured to assess the kidneys status. It is also measured to know the ratio of fluid intake and fluid lost in urine. The method to measure is simple. The urine is made in a measuring bag and when it gets filled up, discarded and another bag is attached. The person can be catheterized or if fit he/she can make urine directly in measuring utensil.