yes
You will need to sand the floor to give the thinset something to stick to.
answerYou would lay timber floor joists acroos the the size would depend upon how high you need to raise the floor. Then you'd lay floor boards over the joists. the joists would be layed every 400mm and would require noggings to reduce movevement and 'creaking'. The floor boards should be of a tongue and groove type for the same reasons. The cheapest floor bords are made of chipboard and are 8' by 2' and they should be glued.If you wanted to raise it a matter of a few inches then you could just screed over the top of it. If you wanted just a few mm then a self leveling liquid can be applied.
No. You have to glue your linoleum on the hard surface, but Laminate is a floating floor and always move.
Yes, concrete is porous and water will move through it over time.
Floating an engineered wood flooring is done using an underlay between the sub floor and the new floor and then the engineered flooring is laid over the top and glued at the tongue and grooves to keep it together. if the flooring is a click joint then gluing is not required.
To install a floating floor over concrete, first ensure the concrete is clean and level. Lay down a moisture barrier, then install underlayment padding. Next, click or glue the floating floor planks together, leaving a small gap around the edges for expansion. Trim the edges and add finishing touches as needed.
To install a floating wood floor over concrete, first ensure the concrete is clean and level. Lay down a moisture barrier, then install a foam underlayment. Next, lay the floating wood planks according to the manufacturer's instructions, leaving space for expansion. Finish by adding trim and transitions as needed.
The best installation methods for hardwood over concrete floors are glue-down and floating floor installations. Glue-down involves adhering the hardwood directly to the concrete using a strong adhesive, while floating floor installation involves placing the hardwood over a foam underlayment without attaching it to the concrete. Both methods are effective for ensuring a stable and durable hardwood floor on concrete surfaces.
To install floating floors over concrete, first ensure the concrete is clean and level. Lay down a moisture barrier, then install underlayment padding. Next, click or glue the floating floor planks together, starting from one corner and working across the room. Trim the edges as needed and allow the floor to acclimate to the room for 48 hours before walking on it.
To install a floating hardwood floor over concrete, you will need to first ensure the concrete is clean, dry, and level. Next, lay down a moisture barrier and underlayment. Then, click or glue the hardwood planks together, leaving a small gap around the edges for expansion. Finally, trim the edges and add finishing touches.
The best flooring option for uneven concrete surfaces is self-leveling concrete or a floating floor system, such as laminate or engineered hardwood. These options can help create a smooth and level surface over the uneven concrete.
Floating Installation This method the floor floats over foam cushioned padding.
Yes but lay the recommended underlay first!
Absolutely.
The best flooring options for a basement with a concrete floor are vinyl, laminate, or engineered wood. These materials are durable, moisture-resistant, and can be installed directly over concrete.
You will need to sand the floor to give the thinset something to stick to.
answerYou would lay timber floor joists acroos the the size would depend upon how high you need to raise the floor. Then you'd lay floor boards over the joists. the joists would be layed every 400mm and would require noggings to reduce movevement and 'creaking'. The floor boards should be of a tongue and groove type for the same reasons. The cheapest floor bords are made of chipboard and are 8' by 2' and they should be glued.If you wanted to raise it a matter of a few inches then you could just screed over the top of it. If you wanted just a few mm then a self leveling liquid can be applied.