Probably not. The single phase three horse power motor will be much larger in physical size than its three phase counterpart, and will probably not fit.
The difference between a single phase and a three phase motor is the amount of power conductors that feed the device. As to the other part of the question a three phase motor will not start or run on single phase. The phase angles on three phase are 120 degrees apart on a single phase system they are 180 degrees apart.
Drawing block diagram of single phase capasitor start motor?
Yes the minimum voltage of an 115vac 400 Hz 3 phase motor will run. You can run a single phase motor on a three service but you cannot be run on a single phase.
capacitor start motor
capacitive start motors start by themselves however a normal single phase induction motor requires a starter motor to 'kick-start' the motor into action.
To use a single/one phase motor instead of a three phase motor is possible if you have a three phase power supply as you will only need to tap one of the three phases together with neutral and an earthwire, however to use a three phase motor instead of a single phase will require the provision of three phase power supply.
You still need the same horsepower. The advantage of the three-phase motor is that it will draw lower current.
Single phase motor winding is often checked just by listening to the noise that the motor is making. An experienced person can tell if the motor is working at single phase or double phase.
No. That would be a single phase motor.
Yes, you can, and it won't burn out IF>>> the horsepower rating is the SAME. Pay attention to wiring and motor rotation. Also check the voltage: the motor voltage must be the same as the voltage between two hots of your 3 phase system. You will only use two hots as this is a single phase motor.
The motor cannot be altered to work on single phase power. You will either have to put in a new single phase motor or use a phase convertor box. Do a google search for phase convertor - you will find plenty.
The difference between a single phase and a three phase motor is the amount of power conductors that feed the device. As to the other part of the question a three phase motor will not start or run on single phase. The phase angles on three phase are 120 degrees apart on a single phase system they are 180 degrees apart.
No, a single phase motor cannot be directly connected to a three phase soft start. A single phase motor requires a single phase power supply, while a three phase soft start is designed for three phase motors. Using the correct soft start for the motor type is essential for proper operation and protection of the equipment.
You will need to install a phase converter or change the motor to single phase. You can find a licensed electrician at www.contraxtor.com
how reversing an ac single phase induction motor to wark as induction generator
Single phase Induction motor
Use VFD to make 3 phase from single phase source.