That depends on exactly what use that particular concrete mix is for.
A lean mix simply means that there is more liquid that concrete in the mix. The mix is thin and pours easier. It is sometimes used when you need to make a base on an uneven surface, like dirt. You would pour the lean mix, and then use it to put the more solid mix on top of.
it is typically 5 parts lime, 3 parts sand, 1 part cement, but varies depending on use and situation
A basic mixture for general use (paths, etc) is: 1 cement : 2 sand : 3 gravel by volume. Mix ingredients dry and add water until the concrete is workable. If too sloppy it may be weak, if too dry it may be difficult to work with.A basic mortar mix (brick laying, etc) is: 1 water : 2 cement : 3 sand.
If you are positive that it is asphalt I would not suggest adhering tile directly to the asphalt. If removal of asphalt is not an option I would install a subfloor and use thinset mortar to adhere the tile. Another option (probably the better option) would be to pour a concrete mix over the asphalt. Than use thinset to install the tile. The concrete will incapsolate the asphalt. Asphalt more than likely has oils in it and can be a hazard.
To prepare a mortar concrete mix for optimal strength and durability, follow these best practices: Use the right proportions of cement, sand, and water according to the mix design. Mix the ingredients thoroughly to ensure uniform distribution. Use clean, well-graded aggregates to enhance strength. Avoid adding too much water, as it can weaken the mix. Cure the concrete properly by keeping it moist for an extended period to improve durability.
go to lowes and buy concrete mix and get alot of water.
The best techniques for preparing and using concrete mortar mix for a construction project include measuring the right proportions of cement, sand, and water, mixing them thoroughly until smooth, and applying the mortar within the specified time frame. It is important to follow the manufacturer's instructions, use the correct tools, and ensure proper curing for a strong and durable finish.
Use for non-load application. Mix with sand to produce a mortar for bricks and blocks. Mix proportions by weight for TYPE N Mortar - 10 kg Masonry Cement - 35 kg Sand
No, it is not possible to use mortar instead of concrete for this project. Mortar is a mixture of cement, sand, and water used for binding bricks or stones together, while concrete is a mixture of cement, sand, gravel, and water used for construction projects that require a stronger and more durable material.
To use Quikrete repair mortar to fix a damaged concrete surface, follow these steps: Clean the damaged area thoroughly. Mix the Quikrete repair mortar according to the instructions on the packaging. Apply the mortar to the damaged area, filling in any cracks or holes. Smooth the surface with a trowel or float. Allow the mortar to cure according to the recommended time on the packaging before using the repaired surface.
To effectively remove mortar from concrete surfaces, you can use a chisel and hammer to carefully chip away at the hardened mortar. Alternatively, you can use a power grinder with a diamond blade attachment to grind away the mortar. Be sure to wear protective gear and work in a well-ventilated area when using these tools.
Thin set mortar? It is what you use to lay ceramic tile.
No, Type S mortar cannot be used without sand. Sand is a key ingredient in mortar mix as it helps provide the bulk and strength necessary for proper adhesion and workability. Omitting sand would result in a weak and unworkable mortar mix.
That depends on exactly what use that particular concrete mix is for.
To make smooth concrete, you can use a concrete mix with the right proportions of cement, sand, and aggregate. Ensure proper mixing and pouring techniques, and use a trowel to smooth the surface before it sets. Consider using a concrete sealer or polish for a smoother finish.
Yes, it is possible to use concrete instead of mortar for certain construction projects, such as building walls or structures where high strength and durability are required. Concrete can be used in place of mortar to bond bricks or blocks together, but it may not be suitable for all types of construction projects due to differences in properties and application methods.