0
Geothermal energy is often though of as having geological structure involved. But water-source heat pumps are also regarded as geothermal for the purpose of classification. Sea water can certainly be used for these.
It is possible you are referring to the circulating water for the plant, and in this case sea water might be possible, but probably would not be very practical.
What else can I help you with?
How much energy does a desalination plant use?
It depends on its capacity or daily desalinized water volume.
What is thermal power generation?
Thermal means "relating to heat." Geothermal (Earth's heat energy) energy is tapped by pumping water down deep bore holes under pressure, the water heats up and turns to steam. When it returns to the surface the steam is used to drive generators, whcih it turn produce electricity. Iceland, which has a lot of volcanic areas and hot springs, makes considerable use of geothermal energy.
Why is the building of desalination plants controversial?
The use of desalination plants is controversial. Two major concerns are:they use a lot of energy, which is supplied by coal-fired power plants. Apart from the pollution caused by these plants there are many who feel that they are not sustainable. That is, they cannot continue to operate without putting the environment and our future at risk.the water flowing back to the sea contains much more salt than normal sea water. It is also warmer. This can affect marine animals and plants that live near the desalination plant.
What science is behind working in a desalination plant?
Evaporation and condensation of water - that is the basic one... Others could use reverse osmosis, which is far more effective, but very expensive...
Can hot springs be used for heating and hot water?
Yes, hot springs can be used for heating and hot water. The naturally occurring hot water can be harnessed for residential or commercial heating systems, such as geothermal heating, which utilizes the Earth's heat to warm buildings. Additionally, hot springs can provide a sustainable source of hot water for domestic use, including bathing and cooking. However, the feasibility depends on factors like the temperature, flow rate, and accessibility of the hot spring.
How is geothermal energy distributed for use?
Geothermal energy is distributed for use through a network of underground pipes that carry hot water or steam from a geothermal reservoir to a power plant. At the power plant, the energy is converted into electricity that can then be transmitted through power lines for distribution to homes and businesses. Geothermal energy can also be used directly for heating and cooling buildings through geothermal heat pumps.
What are the three types of geothermal energy?
Dry Steam Power Plant : generates power directly from the steam from inside the earth.Flash Steam Power Plant : Flash steam plants use waters at temperatures greater than 360F. As this hot water flows up, it is collected in a flash tank where drop in pressure causes the liquid to boil into steam. The steam is then used to run turbines which in turn generate power. The condensed steam is returned to the reservoir.Binary Steam Power Plant : This type of plant uses high temperature geothermal water to heat another liquid which has a lower boiling point than water.
What is the use of coal to geothermal power plant?
Coal can be used in geothermal power plants as a backup fuel source for generating electricity when geothermal energy production is insufficient. This can help ensure a steady supply of electricity during times when geothermal energy output may be limited or unavailable.
What kind of machine is needed to harness geothermal energy?
A geothermal power plant is needed to harness geothermal energy. This plant uses the heat from the Earth's core to generate electricity through the use of steam turbines. Piping networks are also used to transport hot water or steam from underground to the surface.
What form of energy is common in I Iceland?
Mostly geothermal energy, which is naturally heated water from underneath the earth from volcanoes.
How is geothermal energy made into energy?
Power plants produce geothermal energy by utilizing geothermal dry steam or geothermal hot water accessed by digging wells. Dry steam or hot water is brought to the surface through pipes and processed into electricity in the power plant.

There are three different ways that power plants process geothermal energy. The three different methods are dry steam, flash steam and binary-cycle. All three methods use steam to power a turbine which drives a generator that produces electricity.

• Dry steam geothermal power plants use steam that is brought from below the earth's surface through pipes, directly to the power plant's turbines.

• Flash steam geothermal power plants use hot water that is brought from below the earth's surface. The hot water is sprayed into a tank and creates steam.

• Binary-cycle geothermal plants use moderate temperature water from a geothermal source and combine it with another chemical to create steam. The steam powers the turbine that drives the generator to create electricity.
Geothermal energy has other uses besides the production of electricity in power plants.Geothermal sources of hot water can be used to heat buildings. Hot water is pumped through pipes located in the building walls to heat the building.Geothermal hot water can also be used as a household hot water source.Geothermal hot water does not need to be heated and is therefore a clean and cheap source of hot water.
What is the energy transfer for a geothermal power plant?
In a geothermal power plant, energy transfer occurs when heat from the Earth's core is used to heat water to produce steam. The steam turns turbines connected to generators, converting the thermal energy into electrical energy. The electricity generated is then distributed to homes and businesses for use.
Does a nuclear plant generates more energy than a geothermal plant?
Yes, a nuclear plant typically generates more energy than a geothermal plant. Nuclear plants use nuclear reactions to produce heat to generate electricity, while geothermal plants use the Earth's heat to generate electricity. Nuclear plants have a higher energy output due to the intense heat produced by nuclear reactions.
Will salt water or tap water have a greater affect on a plant's growth?
Always use tap water. Salt water kills all plants except plants that live in the sea.
What is geothermal power plant?
All geothermal power plants use steam to turn large turbines, which run electrical generators. This steam comes from steam produced from reservoirs of hot water found a couple of miles or more below the Earth's surface. There are three types of geothermal power plants: dry steam, flash steam, and binary cycle.
How do humans use geothermal energy?
people dont use geothermal it is in the earths crust so people dont use geothermal
What kind of water can you use for sea monkeys?
sea water
