answersLogoWhite

0

Yes you can use Teflon tape or TFE paste. For best results hold tape in left hand and turn male fitting to the right being careful not to let any overhang in the opening so that it may come loose and cause problems further down the system.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Do you use PVC pipe cement when connecting a PVC pipe to a galvanized metal pipe?

No, do not use glue. Use teflon tape or pipe dope on the threads. You should also make sure you always put the male PVC thread into the female metal thread. If you do it the other way you will tend to split the PVC fitting when you tighten the threads.


How can I connect PVC to galvanized pipe?

To connect PVC to galvanized pipe, you can use a PVC to threaded adapter. This adapter has a female threaded end that can be screwed onto the male threaded end of the galvanized pipe. Make sure to use Teflon tape on the threads to create a tight seal and prevent leaks.


Can you use PVC tape inside your gas oven?

No. Use teflon tape instead. PVC will melt or burn depending on the temperature


What is teflon tape often used on?

Teflon tape is a colloquial name to a form of tape that is regularly used in plumbing. Its most frequent use is to seal the threads on lengths of pipework.


Should you use teflon tape with brass to plastic threads?

Yes, otherwise you will have leaks


Should Teflon tape be used on PVC drain pipe?

Teflon tape is generally not recommended for use on PVC drain pipes. Instead, PVC pipes should be joined using appropriate PVC cement or solvent weld, which creates a strong, leak-proof bond. Teflon tape can interfere with the bonding process and may lead to leaks over time. It's best to follow manufacturer guidelines for joining PVC components.


Do you use teflon tape on threaded PVC joints?

yes,as you do in case of joints in ro plants.


Can you use teflon pipe dope on PVC pipe when connecting to cast iron?

If you are screwing in -- yes -- If not -- you do not use pipe dope


How do you properly use Teflon tape for sealing pipe threads?

To properly use Teflon tape for sealing pipe threads, wrap the tape around the male threads in a clockwise direction. Make sure to overlap the tape by about half its width and wrap it tightly. This will help create a tight seal and prevent leaks when connecting the pipes.


Do you use PVC pipe cement when connecting to a PVC pipe thread?

Use teflon tape with a little pipe dope. If you don't ever have to take apart again then you can use glue which you are calling cement


What are the examples of plastic materials?

Examples are: polythene, Teflon, polycarbonate, polystyrene, polysulfide, PVC etc.


How many wraps of teflon tape on PVC pipe?

When using Teflon tape on PVC pipe threads, it's generally recommended to use 2 to 3 wraps of tape. This amount provides a good seal without making the connection too thick, which could lead to difficulty in tightening the joint. Ensure the tape is applied in the direction of the thread so it doesn’t unravel when the joint is tightened. Always check the manufacturer's guidelines for specific recommendations.