answersLogoWhite

0

No corrosion is not a reaction of a metal with nitrogen in the air. Nitrogen in relatively innert and will not normally form chemical compounds. It is the Oxygen in the air that causes the corrosion.

User Avatar

Wiki User

15y ago

What else can I help you with?

Continue Learning about Engineering

What is the difference between corrosion and rust?

Corrosion is the broad term for something that something is being broken down or eaten away due to chemical reaction. For example dis colorization of a painted object that has been in the sun. You can see some red cars turn pink in time if not take care of. Or i metal when you leave nickel in lemon juice above the water line will turn green and when you wipe it away it feels all rough and that is corrosion Rust is a specific type of corrosion that consists of iron being reacting with water (or moist air) causing iron oxides


What causes corrosion?

Basically, corrosion is a disintegration of a material. Corrosion is typically associated with rusting, but that is only one type of corrosion. Other types of corrosion include, erosion, cavitation, fretting, galvanic, thermo-galvanic, intergranular, pitting, and more. The main causes boil down to a few root causes, chemical reactions, friction and a lack of durability. Rust is a chemical reaction, there are more types of reactions than from water and air. Reactions from other metals, acids, etc. cause corrosion as well. Friction can cause stress cracking, fretting, and intergranular corrosion and erosion. Two pieces of metal that rub on each other can cause fretting and lead to corrosion. Or water running over a rock for a few hundred years can turn it into a smooth pebble. Durability is key. Some substances are harder than others, and thus harder to disintegrate. Automotive Solutions: powder coating and plating are common methods to prevent corrosion. Electroless nickel plating is common within parts like ABS sensor rings and gears. powder coating is used on pumps and tanks. zinc plating is often used on bolts and braces. Below is a link to a study on corrosion, its costs, causes and how to prevent it.


Will stainless steel react when in cotact with aluminum?

Not usually, but this can vary by alloys. There are many dozens of Stainless Steels and hundreds or more Aluminum alloys. The common as you can see in chart are very reactive with many steels and other metals. Your asking about "Galvantic Response". To prevent this insulate with some material. = CORROSION: GALVANONIC CORROSION = When two different metals are immersed in a corrosive solution, each will develop a corrosion potential. If the corrosion potential of the two metals is significantly different, and they are in direct contact and immersed in an electrolyte, the more noble metal will become the cathode and the more active metal will become the anode. A measurable current may flow between the anode and the cathode. The corrosion rate of the anode will be increased and the cathode decreased. The increased corrosion of the anode is called "galvanic corrosion". In order for galvanic corrosion to occur, three elements are required. 1) Dissimilar metals 2) Metal-to-metal contact 3) Metals in the same conduction solution (usually called an electrolyte) This can be air/water or moisture no just "solutions". If any of these elements is missing, galvanic corrosion cannot occur. If, for example, the direct contact between the two metals is prevented (plastic washer, paint film etc.) there cannot be galvanic corrosion. The greater the corrosion potential of each metal (the more active or more noble) the greater the potential for corrosion. The "galvanic series" has been developed to list the various metals in order from most active to most noble: SCALE: More Anodic | Magnesium Galvanized Steel Aluminum Mild Steel Low Alloy Steel Cast Iron Lead Tin Muntz Metal Yellow Brass Red Brass Copper Aluminum Bronze Silver Stainless Steel (430) Stainless Steel (304) Stainless Steel (316) Monel Silver Titanium GOLD | V More Cathodic The greater the separation between the two metals listed, the greater the corrosion potential. For example, if zinc (think galvanized steel) which is an active material and near the top of the list and stainless steel, a noble metal and near the bottom of the list were in direct contact and in the presence of an electrolyte (water), galvanic corrosion will probably occur.


What are the materials used to make an Air Conditioner today?

it is made up of iron, aluminum, metal coils on the inside, where air is cooled, and lastly it is made up of sheet metal.


Why purging required for stainless welding?

During the welding of steels, oxidation occurs in the weld seam if oxygen reaches this area unhindered. This situation is even more acute with titanium, zirconium, molybdenum and other gas-reactive metals and alloys. The resulting oxidized surfaces are no longer corrosion-resistant, and further treatment is necessary. Removing oxidation by grinding also removes the metal's passive protection against corrosion. Other mechanical procedures, such as brushing, blasting and pickling remove the oxidation, which restores corrosion resistance. However, in some cases such as pipe welding, removing oxidation after welding is difficult or impossible to do. During pipe welding, oxides are usually located in areas that are almost impossible to access, such as in two 4-inch-diameter pipes that are each 10 feet long. Pickling will restore the corrosion resistance, but it is time-consuming and nearly impossible on a remote job site. Instead of removing oxidation, another solution is to prevent it from occurring in the first place. In essence, this is what purging tries to achieve. With purging, a gas is used to protect the weld seam until it has cooled to the point that oxidation no longer can occur. Usually, an inert gas, such as argon which is heavier than air, is used. Other purging gases such as nitrogen and nitrogen/hydrogen blends can also be used.

Related Questions

What is the slow destruction of a metal through its reaction with oxygen in the air is called what?

The slow destruction of a metal through its reaction with oxygen in the air is called CORROSION


The slow destruction of a metal through its reaction with oxygen in the air is called?

The slow destruction of a metal through its reaction with oxygen in the air is called CORROSION


What is the slow destruction of metal through its reaction with oxygen in the air is called?

The slow destruction of a metal through its reaction with oxygen in the air is called CORROSION


Is corrosion of aluminium metal a physical change or a chemical change?

It is a chemical change. Through corrosion, a chemical reaction has taken place.


What reaction will a metal have if it has no reaction with air?

This metal is not oxidized.


How does paint work to stop corrosion of metal?

The paint prevents the metal from coming in direct contact with air and moisture, which are what cause corrosion.


What is a physical reaction of Rhodium?

Rhodium is a noble metal and is very resistant to corrosion and tarnishing. It does not react with air or water at normal temperatures.


What is tarnishing?

Tarnishing is a process where a metal (like silver or copper) loses its shine and develops a dull or darkened appearance due to exposure to air, moisture, or chemicals. It is caused by a chemical reaction that forms a thin layer of corrosion on the metal surface.


What is wet corrosion and galvanic corrosion?

The dry corrosion is the corrosion of the metal that takes place in the absence of conducting(aqueous) medium. The reaction between metal and oxygen (atmosphere) at elevated temperatures in perfectly dry conditions is an example of dry corrosion.


Which Reaction is taking place when metals reacts slowly with air or water?

corrosion?


Explain dry corrosion with an example?

Dry corrosion, also known as atmospheric corrosion, occurs when metal is exposed to oxygen in the air without the presence of moisture. This process can result in the formation of oxide layers on the metal surface, leading to rusting or degradation. For example, iron exposed to dry air can form iron oxide (rust) over time, weakening the metal and affecting its structural integrity.


What is formed by a slow metal reaction with air and water?

A slow metal reaction with air and water will form a metal oxide. An example of this is iron oxide, better known as rust.