0
What else can I help you with?
Can use stone dust as a filler material for bituminous concrete?
yes,we can use stone dust as a filler material for bituminous concrete because of its good bonding power with the bitumen.
What is the density of the cement concrete grout?
The density of concrete can vary from 2,300 to 3,400 kg/m3.
What is the Density of concrete?
Density of normal concrete is in the order of about 2400 kg. per cubic metre. The densityof light-weight concrete will be less than about density 1900 kg per cubic metre.The high density concrete have unit weight ranging from about 3360 kg percubic metre to 3840 kg per cubic metre.
What is the density of reinforced concrete grade 40?
The density of reinforced concrete is 2500 kg/cum or 25 kn/cum
What is the density of grade 76-10 bitumen?
The density of Grade 76-10 Bituminous Binder is 1.1 gm/cc at 25 degree centigrade with low linear polyethylene modifier (LLPE) polymer.
Is bituminous material is the same for bituminous concrete if not why?
No, bituminous material and bituminous concrete are not the same. Bituminous material refers to the binder, typically asphalt, used in asphalt pavement mixtures. Bituminous concrete, on the other hand, refers to the final pavement product made by combining bituminous material with aggregates like sand and stone.
What is 'bituminous macadam'?
how many density of 'bituminous macadam'?
Explain how aggregates are processed for the use as a Portland cement concrete ingredient or as a bituminous concrete ingredient?
Aggregates are processed for concrete or bituminous concrete by crushing and screening them to produce the desired sizes and gradation. For Portland cement concrete, the aggregates need to be clean and free from debris to ensure good bonding with the cement paste. For bituminous concrete, the aggregates are coated with bitumen to enhance adhesion and durability. Proper processing of aggregates is essential to ensure the quality and performance of the final concrete or bituminous concrete mix.
What is the density of bituminous emulsion?
The density of bituminous emulsion typically ranges from 1.01 to 1.20 grams per cubic centimeter. The density can vary depending on the formulation and composition of the emulsion.
Can use stone dust as a filler material for bituminous concrete?
yes,we can use stone dust as a filler material for bituminous concrete because of its good bonding power with the bitumen.
What is the density of bituminous coal?
It is a brown coal i think?
Density of bituminous macadam at 3.3 to 3.5 percent?
2.15
What is the density of bitumen felt?
The density of bituminous concrete varies a lot, depending on the density of the stone used to make it. In my area, the stone is hard, blue basalt, and the density of bituminous concrete made with it is around 155 pounds per cubic foot.
Which has greater density wet or dry concrete?
Dry concrete has a greater density than wet concrete because the water content in wet concrete decreases its overall density. When the water in wet concrete evaporates during the curing process, the concrete becomes denser.
What is the density of sub-bituminous coal?
The density of sub-bituminous coal ranges from 35 to 45 pounds per cubic foot (lb/ft3) or 560 to 720 kilograms per cubic meter (kg/m3).
What is the density of M-30 grade concrete?
Density of M30 and any fresh concrete is 2400kg/cu.m and reinforced concrete density you can take 2500 kg/cu.m
What fraction of a piece of concrete will be submerged?
The fraction of a piece of concrete submerged in water depends on its density compared to the density of the water. If the density of the concrete is greater than the density of water, the fraction submerged will be less than 1. If the density of the concrete is less than the density of water, the entire piece of concrete will be submerged.
