Can fuel oil be used in a deisel engine?
There are different specifications. Is this new oil or used oil? What type of oil is it? There are at least 3 classes of insulating liquids. I will assume that this is for new Mineral Oil such as Diala-A. Here are the minimum requirements from NETA ATS 2007: Dielectric Breakdown (ASTM D877) = 30 kv Interfacial Tension (ASTM D971) = 38 minimum Neutralization Number (ASTM D974) = 0.015 maximum Water Content (ASTM D1533) = 20 ppm maximum Power Factor @ 25C (ASTM D924) = 0.05% maximum Power Factor @ 100C (ASTM D924) = 0.40% maximum Color (ASTM D1500) = 1.0 Again if it is a different class of insulating fluid there will be additional and/or different limits.
Several Oil fields together make up an oil block
An oil rig is an oil platform or oil production platform. A drilling is different though.
There is no difference that I am aware of. These terms seem to be used interchangably.
AOC is Accidently Oil Contaminated and COC is Continuously Oil Contaminated.
There are different specifications. Is this new oil or used oil? What type of oil is it? There are at least 3 classes of insulating liquids. I will assume that this is for new Mineral Oil such as Diala-A. Here are the minimum requirements from NETA ATS 2007: Dielectric Breakdown (ASTM D877) = 30 kv Interfacial Tension (ASTM D971) = 38 minimum Neutralization Number (ASTM D974) = 0.015 maximum Water Content (ASTM D1533) = 20 ppm maximum Power Factor @ 25C (ASTM D924) = 0.05% maximum Power Factor @ 100C (ASTM D924) = 0.40% maximum Color (ASTM D1500) = 1.0 Again if it is a different class of insulating fluid there will be additional and/or different limits.
no
The difference between barrel and gallen is that a barrel can load 220 litre oil and a gallon can load millions of oil.
Difference is capacity and the fuel type.
baby oil is scented mineral oil
Baby oil is mineral oil that has had a scent added to it.
Oil Reserves are big and oil deposits are small.
The main difference between gear oil and motor oil is where they are used and how they are formulated. Motor oil (engine oil) is used in the engine. It lubricates moving parts such as pistons and crankshafts, helps reduce heat, cleans internal engine components, and prevents rust and wear. It is designed to handle high temperatures and combustion by-products. Gear oil is used in the gearbox, transmission, and differential. It lubricates gears that operate under very high pressure. Gear oil is usually thicker than motor oil and contains special additives to protect gear teeth from extreme pressure and heavy loads. In simple terms, motor oil is made for the engine, while gear oil is made for the transmission and gears. They are different in thickness and additives, and they should not be used interchangeably.
The main difference between virgin oil and extra virgin oil is the level of acidity. Extra virgin oil has a lower acidity level and is considered to be of higher quality compared to virgin oil.
Deisel is made out of plants.
There is no difference between 2 stroke oil and 2 cycle oil. They are the identical product but are called different names. The 2 stroke refers to the engine type that the oil can be used in.
how can I tell the difference between acrylic and oil paint on my wall?