Yes because your dishwasher is connected under your kitchen sink in most cases. You also need a 2" drain line and trap and 1/2 cold/hot water lines.
Yes, as long as it isn't a dry VENT stack
more than one simple machine is contained in a Washing machine(complex machine)
The first washing machine was invented in the year 1851. It was the drum washing machine and it was invented by James King.
James King invent the washing Machine at 1851.
James King invented the first drum washing machine in 1846 the first electric washing machine was not made until 1908
Yes
A washing machine plumbing diagram typically includes the water supply lines, drain pipe, and any necessary valves or connections for proper installation and operation of the washing machine.
It is not recommended to use dishwasher detergent in the washing machine for clothes because dishwasher detergent is formulated differently and may not dissolve properly, leading to poor washing results or damaging the washing machine. It is best to use detergent specifically designed for laundry to ensure effective cleaning and protect your clothes and machine.
2" by most plumbing codes
Not if you are in area where there is a chance of freezing.
a bathtub,washing machine,dishwasher,pop,soda,soapy water etc.
yes because it all ready has a washer dispencer in it
The steps involved in washing machine plumbing installation include: 1. Shutting off the water supply 2. Connecting the water hoses to the machine 3. Connecting the drain hose to the plumbing system 4. Securing the hoses and ensuring proper connections 5. Testing the machine for leaks and proper functioning.
An air admittance valve for a washing machine is used to prevent sewer gases from entering the plumbing system. It allows air to enter the system to equalize pressure, which helps prevent siphoning and allows for proper drainage of water from the washing machine.
A washing machine drain plumbing diagram typically shows the layout and connections of pipes and fixtures involved in draining water from the washing machine. It may include details such as the location of the drain hose, the trap, the standpipe, and any necessary vents or connections to the main sewer line.
The recommended height for a washing machine trap in a residential plumbing system is typically between 6 to 18 inches above the floor level. This height helps to prevent water from flowing back into the machine and causing potential issues.
Buy a branch connector