answersLogoWhite

0

Yes you need to shut off the Main water valve. Usually found in the basement or outside the house near the meter. Also you need to shut off the Gas valve located at the water heater, or the Breaker located in the breaker box/ fuse panel. Sometimes the water heater will have its own Switch box, located on the power wire

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Why is there no hot water in the bathroom, but everywhere else in the house?

There may be a problem with the water heater specifically connected to the bathroom, such as a malfunction or a blockage in the pipes. It is recommended to check the water heater and pipes in the bathroom to identify and fix the issue.


Do you have to replace the copper pipes when replacing ac unit?

no need to change the copper tube if the capacity of the unit is same.


Do you need to shut off your hot water heater when swapping out copper pipes in a bathroom remodel?

Water heaters should be turned off, with the gas or electric to them turned off as well, when replacing any hot water lines. This would also be a good time to drain the tank and remove any built up water scale. This makes your heater more efficient.


Why is there no hot water in the bathroom?

There may be no hot water in the bathroom due to a problem with the water heater or a plumbing issue. It is recommended to check the water heater settings and pipes to determine the cause of the issue.


No heat after replacing heater core and thermostat?

You may have an air lock in the heater pipes some vehicles are fitted with bleed screws for this purpose.


What are the benefits of using copper pipes in a water heater system?

Copper pipes are beneficial in water heater systems because they are durable, resistant to corrosion, have good heat conductivity, and are easy to install. These qualities help ensure efficient water flow and heat transfer, leading to a longer lifespan for the water heater system.


Are copper pipes the best?

Copper pipes will last the longest. anonymous@oola.com


Why is copper used for water pipes?

Copper is used as hot water pipes because the copper will not corrode when the hot water goes through the pipes


How much copper inside a hot water heater?

The amount of copper inside a hot water heater varies depending on the size and design of the unit. Typically, copper is used in the construction of the heat exchanger, pipes, and tubing within a hot water heater. Small residential units may contain a few pounds, while larger commercial units can have several pounds of copper components.


Why is copper used for hot water pipes?

Copper is used as hot water pipes because the copper will not corrode when the hot water goes through the pipes


What is the Composition of copper pipes?

Copper 99%


Are copper pipes a compound?

No, copper is a metallic element.