answersLogoWhite

0

A DC generator typically produces a pulsating output voltage rather than a perfectly smooth DC voltage. This is due to the nature of its operation, where the generated voltage fluctuates with the rotation of the armature within the magnetic field. To achieve a smoother DC output, additional components such as filters or voltage regulators are often used to reduce the ripple and stabilize the voltage.

User Avatar

AnswerBot

5d ago

What else can I help you with?

Continue Learning about Engineering

What is the function of a capacitor in the half wave rectification?

to smooth the output of the half-wave rectifier from 1/2 an AC cycle per period to a constant voltage.


How do you convert dc to ac current?

The AC current is fed into a rectifier, which is a set of four diodes that force the current at the output to be one direction. A capacitor across the rectifier output is then used to smooth out the voltage to a level higher than the desired DC output (eliminating, for example, the zero-voltage portions of the original AC sine-wave) A voltage regulator then regulates the voltage to a constant level.


What is the affect of a lightly loaded ups input filter when on generator power?

A lightly loaded UPS input filter on generator power can lead to poor power quality and increased harmonic distortion. The filter may not effectively smooth out voltage fluctuations or filter out noise, resulting in unstable output from the generator. This can affect the performance of connected equipment and potentially lead to inefficiencies or malfunctions. Additionally, under light load conditions, the filter might not operate within its optimal range, exacerbating these issues.


Why you use capacitor in a power supply?

The result of rectifying AC into DC produces a pulsating DC voltage. This is usually not acceptable. Capacitors store some of the energy, and release it during the time when the recftified voltage falls to zero. This smooths out the pulsations and produces a relatively smooth, constant DC output.


Why use capacitor in circuit?

To smooth the output of the pulsating DC.

Related Questions

What is the function of a capacitor in the half wave rectification?

to smooth the output of the half-wave rectifier from 1/2 an AC cycle per period to a constant voltage.


Why should the generator field rheostat be kept to its maximum at starting?

Keeping the generator field rheostat at its maximum at starting helps to establish a strong magnetic field in the generator, which is essential for generating sufficient voltage to initiate the generation process. This ensures a smooth and stable startup of the generator.


How do you convert dc to ac current?

The AC current is fed into a rectifier, which is a set of four diodes that force the current at the output to be one direction. A capacitor across the rectifier output is then used to smooth out the voltage to a level higher than the desired DC output (eliminating, for example, the zero-voltage portions of the original AC sine-wave) A voltage regulator then regulates the voltage to a constant level.


How do rectifiers and transformers work in a PC power supply?

There is no transformer used in PC power supply. There is rectifier used to rectify or convert AC input voltage into DC output voltage.Transformer based rectifier produces some spikes at the output DC voltage, hencethey uses SMPS (Switch Mode Power Supply) to avoid spikes to the output DC voltage and get a smooth DC voltage.


What is the affect of a lightly loaded ups input filter when on generator power?

A lightly loaded UPS input filter on generator power can lead to poor power quality and increased harmonic distortion. The filter may not effectively smooth out voltage fluctuations or filter out noise, resulting in unstable output from the generator. This can affect the performance of connected equipment and potentially lead to inefficiencies or malfunctions. Additionally, under light load conditions, the filter might not operate within its optimal range, exacerbating these issues.


How does a power adaptor work?

it converts AC line voltage to DC low voltage. at first by transformer it setps-down the voltage then it rectified by bridge rectifier ckt. by this there is rippled DC output is there. then is this fed to filter circuit to filter the ripples and its given to regulator circuit to produce fine and smooth pure DC voltage. nowady SMPS (switch mode power supply) is use rather then older iron core transformers. SMPS have plenty of advantages over the Linear power adaptor. :))


Why you use capacitor in a power supply?

The result of rectifying AC into DC produces a pulsating DC voltage. This is usually not acceptable. Capacitors store some of the energy, and release it during the time when the recftified voltage falls to zero. This smooths out the pulsations and produces a relatively smooth, constant DC output.


What is the goal of stabilization policy is to smooth out fluctuations in the?

GDP output


Why use the capacitor in the full rectifier?

to smooth the output waveform


Why use capacitor in circuit?

To smooth the output of the pulsating DC.


What is AC ripple voltage?

Ripple voltage is when the DC voltage varies between (for example)12.5 Volts and 13.5 Volts, and does so rapidly. Technically, an alternator produces "alternating current", (hence the name, 'Alternator') and that AC voltage is converted to DC by running the current through a bank of "diodes". Diodes are able to allow current to flow one direction and not the other. As the voltage runs through the diodes it becomes a form of DC voltage, along with pulsations of up and downs, which is called as ripples. All electronic circuit require a steady DC supply free from these unwanted ripples. Fortunately, a battery when charged by pulsating rectified DC output can smooth out most of those ripples for us. If battery backup is not available in supply then filters ( reactive circuit elements, inductor in series and capacitor parallel to load) circuits can smooth out these ripples and improve quality of rectified output. BTW, it's called ripple voltage because when you look at the voltage on an oscilloscope it looks like ripples as the voltage varies.


Why capacitor used in rectifier circuit?

To smooth the output of the pulsating DC.