0
What else can I help you with?
What is the mechanical advantage of this machine if A system of pulleys is used to raise a load of bricks that weighs 1700 newtons. The force applied to the pulley is 340 newtons.?
The mechanical advantage (MA) of a machine can be calculated using the formula: MA = Load Force / Effort Force. In this case, the load force is 1700 newtons and the effort force is 340 newtons. Therefore, MA = 1700 N / 340 N = 5. This means that the pulley system provides a mechanical advantage of 5, allowing a smaller force to lift a heavier load.
How does the size of a ideal mechanical advantage compares to the mechanical advantage?
This is because the actual mechanical advantage is the actual calculation found after dividing the effort force by the output force. Ideal mechanical advantage is what many people would call and estimate. When estimating mechanical advantage, the numbers are always rounded. This makes actual mechanical advantage less. Sources: Science teacher ------------------------------------------------------------------------------------------------------------------ The answer above is incorrect. The ideal mechanical advantage (IMA) is usually less than the mechanical advantage (MA) in a given machine because of the friction acting on the machine. There will always be some frictional resistance that increases the effort necessary to do the work.
What is the mechanical advantage of a ramp What is the mechanical advantage of a ramp standing straight up?
The mechanical Advantage is FORCE TIMES DISTANCE
What is a mechanical adventage?
Mechanical Advantage;The ratio of load and effort is called mechanical advantage of any machine.Mathematical Formula Of Mechanical AdvantageMechanical Advantage = Load / EffortUnit Of Mechanical AdvantageAs mechanical advantage is the ratio of two forces, therefore it has no unit.
How do you calculate the mechanical advantage of any machine?
distance over which the force is applied ________________________________ Distance over which the load was moved or MA= Effort Force _________ Load force OR MA= Length of Load arm ____________________X Weight/mass Length of Effort arm
What is the pulley formula used to calculate the mechanical advantage of a system involving pulleys?
The pulley formula used to calculate the mechanical advantage of a system involving pulleys is MA 2n, where MA is the mechanical advantage and n is the number of pulleys in the system.
How many times force is multiplied is the mechanical?
In a mechanical advantage system, the force is multiplied by the factor of the mechanical advantage. The formula for mechanical advantage is MA = output force / input force. This means the force can be multiplied by the mechanical advantage value.
What is mechanical advantage of a machine?
In physics and engineering, mechanical advantage(MA) is the factor by which a mechanism multiplies the force or torque put into it. Generally, the mechanical advantage is calculated as follows: or more simply:
Mechanical advantage formula?
The mechanical advantage (MA) is calculated as the ratio of the output force to the input force, or the distance the input force acts over compared to the distance the output force moves. The formula for mechanical advantage is MA = output force / input force = input distance / output distance.
Which has the greater mechanical advantage a wedge that is 6cm long and 3cm wide or a wedge that is 12cm long and 4cm wide explain?
To determine the mechanical advantage of a wedge, you can use the formula: Mechanical Advantage (MA) = Length of the wedge / Width of the wedge. For the first wedge (6cm long, 3cm wide), MA = 6/3 = 2. For the second wedge (12cm long, 4cm wide), MA = 12/4 = 3. Therefore, the second wedge has a greater mechanical advantage of 3 compared to the first wedge's mechanical advantage of 2.
What is the ma of a machine that has an f out equal to its f in?
The mechanical advantage (MA) of a machine that has an output force equal to its input force is 1. This means that the machine does not provide any mechanical advantage, as the output force is equal to the input force.
What is the mechanical advantage equation for the screw?
The mechanical advantage equation for a screw is calculated by dividing the circumference of the screw (distance traveled per revolution) by the pitch of the screw (vertical distance traveled per revolution). The formula is MA = 2πr / p, where MA is the mechanical advantage, r is the radius of the screw, and p is the pitch of the screw.
What does mA mean in science?
mA stands for milli-Amps. It is an electrical current of 1/1000 of an amp.
Which of these shows the correct way to calculate mechanical advantage?
Mechanical advantage is calculated by dividing the output force by the input force. The correct formula is: mechanical advantage = output force / input force.
For a given machine explain why the MA is usually less than the IMA?
The mechanical advantage (MA) is usually less than the ideal mechanical advantage (IMA) for a machine due to factors such as friction, inefficiencies in the machine's design, and energy losses through heat or sound. These factors cause the input work to be greater than the output work, resulting in a lower actual mechanical advantage compared to the ideal mechanical advantage.
What is the pulley calculation formula used to determine the mechanical advantage of a pulley system?
The formula to calculate the mechanical advantage of a pulley system is MA 2 number of movable pulleys.
What is the formula for fiding the mechanical advantage?
The formula for finding mechanical advantage is MA = output force / input force. It represents the ratio of the output force to the input force in a simple machine.
