In regards to the capacity of a conductor, the rating is in amperage. Voltage is an insulation factor which refers to the amount of voltage that can be applied to an insulated conductor before the insulation breaks down. A break down of insulation is the main factor of creating a short circuit condition.
ohms
Splice uses stranded wires while joint uses solid wire.
There is no difference in the cables. The only difference is the type of electrical power being transmitted. AC or DC applications use the same wires.
ACT has thermoplastic insulated wires. AC is old MC is the modern cable.
In the first part of the question there will be only one wire in the conduit, in the second part of the question there will be two wires in the conduit.
The unit that describes the difference in conduction between wires is typically the electrical conductivity or resistivity, which is measured in Siemens per meter or Ohm meters, respectively. This value indicates how well a material conducts electricity, with higher values indicating better conduction and lower values indicating higher resistance to the flow of electricity.
ohms
Ohms (of resistance).
.10MM
The difference between red and white wires in electrical circuits is their purpose and function. Red wires are typically used as hot wires to carry electrical current, while white wires are usually used as neutral wires to complete the circuit and return the current to the power source.
The difference between white and black wires in electrical circuits is that white wires are typically used as neutral wires, while black wires are usually used as hot wires. Neutral wires carry current back to the power source, while hot wires carry current from the power source to the device being powered.
No difference in terms of number of wires used.
No difference in terms of number of wires used
The only difference between a Bowflex machine and free weights are wires. The Bowflex machine uses weight resisting wires to increase your weight. With free weights you are using your own muscle to rely on.
Ground clearance in a substation is the distance between wires and the ground or other objects such as buildings. Sectional clearance is the distance between the wires themselves in a substation.
Because the wires are connected differently.
The voltage difference between the birds legs maybe very small. The shock comes when the voltage difference is large like between two different wires. Birds don't usually put their feet on different wires.