answersLogoWhite

0

No.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you get rid of concrete bugs?

burn them


Does a snail travel faster on sand or concrete?

Concrete because the sand would burn it.


Is concrete harmful?

Wet concrete is caustic- it will burn your skin. Concrete DUST is not good to inhale- it may contain silica. Solid, cured concrete is about as hazardous as a rock.


What do I do when I am in a waterpark and the concrete is hot?

Either avoid walking on the concrete, or make sure your feet are always wet. This will help protect you from the burn of the concrete. Just make sure to dip them in the water every now and then.


Will my metal tip get flat on your burn fire blaze?

Yes if you use it on the concrete long enough


Can you cut panel boards with a skil saw blade made for concrete?

If your panel boards have a concrete content as some do,yes you can. If the main content of the board is wood, then you will burn them.


Does acid containing sulfuric acid affect buildings?

If it OS pressurised, it might melt concrete and burn wood, but if not, probably not.


Is the word scorch a concrete noun?

Scorch is a verb, meaning to burn something. Be careful not to scorch the blouse with the hot iron.


Is concrete tilt up consider non combustible?

Yes, concrete tilt-up construction is typically considered non-combustible due to the fact that concrete does not burn or contribute to the spread of fire. This makes it a desirable choice for buildings where fire resistance is a priority.


Is burnout on concrete with a manual transmission possible?

turn your wheel all the way to the left or right either one works, rev the engine and dump the clutch. you wil do a burn out.:]


What type of concrete should you use when making a concrete bench?

The best concrete for making a concrete bench is Bench concrete.


How do I calculate the amount of cement needed?

First, things are not made of cement- they are made of concrete- which consists of cement, sand, gravel and water. Mix them using 1 part cement, 1.5 parts sand, 3 parts gravel. To calculate how much CONCRETE you need, multiply depth X width X length in inches, then divide by 1728. This will tell you the number of cubic FEET of concrete. To get the number of cubic YARDS, divide the cubic feet by 27. If you are using packaged concrete mix (Sakrete is one) then an 80 lb bag makes 0.6 cubic feet of concrete. NOTE: If you are working with concrete for the first time- do not add too much water (weakens the concrete) and do not get wet concrete on bare skin- it will cause a chemical burn. Wash it off promptly if you do.