0
What else can I help you with?
What is the difference between a Hot water shut off valve and cold water shut off valve?
the hot water valve shut off valve shuts off the hot water. The cold water valve shuts off the cold water. ;()
Where should a service valve be located to isolate the hot water supply from the hot water storage vessel to the taps is it the primary return or primary flow or cold feed or open vent?
The isolation valve should (must) be placed on the cold water side (and/or the return side), entering the water heater. Placing the isolation valve on the hot or outlet side of the water heater has the potential of creating a bomb.
Which has more sediment hot or cold water?
Normally Hot
Why does a hot water tap partially open slowly stop flowing?
It's probably because the tap washer is made of the incorrect material for a hot tap which must have a degree of temperature resistance. If not, the tap washer could swell and expand when the hot water flows, thus cutting off the flow.
Can you use PVC for hot tap water?
NO. PVC is for cold water only, CPVC is for hot or cold. I say forget the CPVC and just use pex.
Why does your cold water have water flow but hot water has no flow?
This could be due to a blockage in the hot water line or a malfunction in the hot water faucet. Check for any clogs in the faucet or the hot water pipe. If the issue persists, it may require a plumber to inspect and fix the problem.
How can I quickly get hot water from the cold tap?
To quickly get hot water from the cold tap, you can turn on the hot water faucet and let it run until the hot water reaches the tap. This process helps to flush out the cold water in the pipes and allows the hot water to flow faster.
What is the function of the hot and cold water valve in a plumbing system?
The hot and cold water valves in a plumbing system control the flow of hot and cold water into the fixtures, allowing users to adjust the temperature of the water coming out of the taps or shower.
Why when you Flush hot water gets hot in sinks and showers?
When you flush your toilet, cold water is used, this diverts cold water from the sinks and showers, resulting in diminished cold water flow momentarily at the sinks and showers, so, less cold mixed with hot, = hotter sinks and showers.
What will happen energetically to a cup of boiling hot water that is added to a cup containing a cold piece of metal?
choices are: The cold will flow from the metal into the hot water, causing the hot water to warm up and the metal to cool down. b. The energy from the hot water will flow into the cold metal, cooling the water down and heating up the metal. c. The cold will flow from the metal into the hot water, causing the hot water to cool down and the metal to warm up. d. The metal will cool down because the specific heat of water is high.
What direction will heat flow if cold water is added to a hot pan?
Water droplets will start evaporating on contacting the pan bottom, and they will tend to "dance" on the produced steam.
In which direction does heat flow: from hot to cold or from cold to hot?
Heat flows from hot to cold.
Why would there be hot water overflowing from this pipe?
Not being able to see the pipe and not knowing where it is, it's kind of hard to know. If it is a cold water line and you have not shut off the hot water tank, the pressure from the hot water will back flow and hot water will come out of the cold side.
How does a hot and cold mixer valve work to regulate water temperature in a plumbing system?
A hot and cold mixer valve works by combining hot and cold water streams to achieve the desired temperature. The valve has two separate inputs for hot and cold water, which are mixed together based on the position of the handle or knob. By adjusting the ratio of hot and cold water flow, the valve regulates the temperature of the water coming out of the faucet or shower.
What is continuous flow of hot or cold water that comes naturally from the ground?
A natural continuous flow of hot or cold water that comes from the earth's surface is known as a spring. These springs can be found in various forms including hot springs and cold springs, each containing water that has traveled through underground rock formations before emerging on the surface.
Is the hot and cold outside spigot functioning properly?
To determine if the hot and cold outside spigot is working correctly, check if both hot and cold water flow smoothly and at the expected temperature when the spigot is turned on.
Is it true that cold water is hot?
No, cold water is not hot. Cold water is at a lower temperature than hot water.
