0
Find the equivalent resistance of the circuit shown in Figure 20-37 R1 7.0 R2 6.0 R3 9.0 R4 6.0 and R5 2.0?
This looks like a question from a student's coursework. It is impossible to answer without seeing the diagram or Figure 20-37, as is stated in the question.
The actual diagram is needed to show which components are in parallel and which are in series.
If you want someone else to do your homework for you, you will either have to find out how to attach a Related Link to this question, going to a separate web page which shows the diagram, or - much better - read your course materials and answer this question all by yourself. Doing the work yourself is the only way to really learn this technical stuff!
What else can I help you with?
What is the use of resistance in a LC circuit?
every inductor has some resistance. In circuit diagram, ideal inductor is shown in series with a resistor(value being equal to coil's resistance) to make analysis easy.
1. Connect the circuit as shown in the figure below, and measure the DC voltage VB, VE and Vc. Tab your results as shown in Table 1?
ممكن الاجابه
How do you find shorts and opens in an electrical circuit in multimeter?
An open circuit essentially has an infinite resistance. It is shown on digital multimeter as OL. (Open Line) A short circuit should read zero, or nearly zero, depending on the accuracy of the meter.
What is a closed circuit?
A closed circuit is a kind of electric circuit in which the path that the electrons follow forms a complete circuit.
In the circuit shown if the value of the reactive component was increased?
if the value of the reactive component was increased, how would it change the waveforms?
What is the use of resistance in a LC circuit?
every inductor has some resistance. In circuit diagram, ideal inductor is shown in series with a resistor(value being equal to coil's resistance) to make analysis easy.
In the circuit shown below with each bulb holding a resistance of 60 ohms how many amps of current are flowing?
There is no circuit shown in your question. It is not possible for us to see your homework paper and answer this question.
1. Connect the circuit as shown in the figure below, and measure the DC voltage VB, VE and Vc. Tab your results as shown in Table 1?
ممكن الاجابه
How do you find shorts and opens in an electrical circuit in multimeter?
An open circuit essentially has an infinite resistance. It is shown on digital multimeter as OL. (Open Line) A short circuit should read zero, or nearly zero, depending on the accuracy of the meter.
How many potentially different currents are there in the circuit shown?
In the circuit shown, there are potentially three different currents.
what- yuki is provided with the figure shown. it is given that ...?
A+
What is the phase constant of the oscillation shown in the figure, given that the values are 180, 0, and 180?
The phase constant of the oscillation shown in the figure is 180 degrees.
When a PNP transistor is connected in a circuit in the manner shown in Figu 52 his?
This question makes no sense. If more information had been given - concerning at least some details about "the manner shown in Figure 52" - then someone might have been able to give a better answer than this one...
How many paths through which charge can flow would be shown in a circuit diagram of a series of circuit?
one
Is it correct to say shown in drawing or shown on drawing?
It would be more correct to use "in" than "on". But rather than using "drawing" it might be better to use the word "illustration" or "figure" unless you were referring to an actual drawing as a piece of artwork.
How many different labeled rays are shown?
There are two different labeled rays shown in the figure.
What is the angle of rotational symmetry of the figure shown?
45
